Top 10 CMT 10 Inch Saw Blades – Miter Saw Blades

As an Amazon Associate I earn from qualifying purchases.

1. CMT

 #ad

CMT 221.060.10 Industrial Cabinetshop Saw Blade, PTFE Coating, 10-Inch x 60 Teeth TCG Grind with 5/8-Inch Bore

#ad
CMT #ad - For radial arm saws, laminate, MDF, miter/table & special saws.0126 kerf thickness, 0087 plate thickness, 10° hook angle, Trapezoidal tooth Grind. For heavy-duty crosscuts, perfect finishing on single-sided laminated panels. Non-stick ptfe coating keeps blade running cool, reduces pitch buildup, protects against corrosion. Micrograin carbide teeth to last longer and deliver smooth cuts. Excellent on one-sided laminates. Cut chipboard, hardwood & plywood.
BrandCMT #ad
ManufacturerCMT #ad
Height0.13 Inches
Length10 Inches
Weight2 Pounds
Width10 Inches
Part Number22106010
Model221.060.10
WarrantyCMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits. CMT is not liable for damages to goods, property or persons, due to improper installation or misapplication of equipment.

2. CMT

 #ad

10-Inch x 42 Teeth 1FTG+2ATB Grind with 5/8-Inch Bore, CMT 251.042.10 ITK General Purpose Saw Blade

#ad
CMT #ad - To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood. 0098 kerf thickness, 0071 plate thickness, 15° hook angle, 1 Flat + 2/15° alternate teeth Grind. Good rip cut on wood. For fast crosscuts on wood and plywood. Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products. Laser-cut plate features expansion slots to reduce noise and anti-vibration design.
BrandCMT #ad
ManufacturerCMT #ad
Height0.1 Inches
Length10 Inches
Weight1.95 Pounds
Width10 Inches
Part Number251.042.10
Model251.042.10
WarrantyCMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits. CMT is not liable for damages to goods, property or persons, due to improper installation or misapplication of equipment.

3. CMT

 #ad

10-Inch x 24 Teeth 1FTG+2ATB Grind with 5/8-Inch Bore, CMT 250.024.10 ITK Industrial Rip Saw Blade

#ad
CMT #ad - Good on plywood. Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products. Laser-cut plate features expansion slots to reduce noise and anti-vibration design. 0098 kerf thickness, 0071 plate thickness, 20° hook angle, 1 Flat + 2/15° alternate teeth Grind. To be used on radial arm saws, miter saws, table saws for cutting soft/hardwood. For fast rip cuts on soft/hardwood thanks to the thin kerf design.
BrandCMT #ad
ManufacturerCMT #ad
Height0.1 Inches
Length10 Inches
Weight1.76 Pounds
Width10 Inches
Part Number240.008.04
Model250.024.10
WarrantyCMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits. CMT is not liable for damages to goods, property or persons, due to improper installation or misapplication of equipment.

4. CMT

 #ad

10-Inch x 60 Teeth 1FTG+2ATB Grind with 5/8-Inch Bore, CMT 253.060.10 ITK Industrial Finish Sliding Compound Miter Saw Blade

#ad
CMT #ad - Glass-smooth finish on your miter cuts. For fine finish crosscuts. Laser-cut plate features expansion slots to reduce noise and anti-vibration design. Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products. To be used on compound miter saws for cutting soft/hardwood, plywood and two-sided laminates. 0098 kerf thickness, 0071 plate thickness, 7° hook angle, 1 Flat + 2/15° alternate teeth Grind.
BrandCMT #ad
ManufacturerCMT #ad
Height0.1 Inches
Length10 Inches
Weight2 Pounds
Width10 Inches
Part Number253.060.10
Model253.060.10
WarrantyCMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits. CMT is not liable for damages to goods, property or persons, due to improper installation or misapplication of equipment.

5. CMT

 #ad

10" x 80 Teeth, CMT P10080 5/8" Bore ITK Melamine & Ultra Finish Saw Blade

#ad
CMT #ad - For crosscuts, fine finish on two-sided laminates without using scoring blades. Use on radial arm, moldings, melamine, laminates, miter and table saws for cutting wood, chipboard. Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed. 0094 kerf thickness, 0063 plate thickness, 10Degree hook angle. Special carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion.
BrandCMT #ad
ManufacturerCMT USA, Inc. #ad
Height0.09 Inches
Length10 Inches
Weight1.81 Pounds
Width10 Inches
Part NumberP10080
ModelP10080

6. CMT

 #ad

10-Inch x 50 Teeth 4ATB+1TCG Grind with 5/8-Inch Bore, CMT 215.050.10 Industrial Combination Blade, PTFE Coating

#ad
CMT #ad - Cut soft and hardwood, plywood & chipboard. The large gullets allow deep cuts and effective chip clearance. Non-stick ptfe coating keeps blade running cool, reduces pitch buildup, protects against corrosion. 0126 kerf + 0087 plate thickness, 4 alternate teeth, 12° hook angle, 1 trapezoidal tooth Grind. For radial arm saws, miter saws, table & special saws. For rip and crosscuts. Micrograin carbide teeth to last longer and deliver smooth cuts.
BrandCMT #ad
ManufacturerCMT #ad
Height0.13 Inches
Length10 Inches
Weight2 Pounds
Width10 Inches
Part Number215.050.10
Model215.050.10
WarrantyCMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits. CMT is not liable for damages to goods, property or persons, due to improper installation or misapplication of equipment.

7. CMT

 #ad

10-Inch x 50 Teeth 1FTG+4ATB Grindwith 5/8-Inch Bore, CMT 256.050.10 ITK Industrial Combination Saw Blade

#ad
CMT #ad - For rip and crosscuts. Laser-cut plate features expansion slots to reduce noise and anti-vibration design. 0098 kerf thickness, 15° hook angle, 0071 plate thickness, 1 Flat + 4/20° alternate teeth Grind. Cut solid wood, melamine, plywood, laminates, chipboard. Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products. The large gullets allow deep cuts and effective chip clearance. Use on radial arm/miter saws, table saws.
BrandCMT #ad
ManufacturerCMT #ad
Height0.1 Inches
Length10 Inches
Weight1.65 Pounds
Width10 Inches
Part Number256.050.10
Model256.050.10
WarrantyCMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits. CMT is not liable for damages to goods, property or persons, due to improper installation or misapplication of equipment.

8. CMT

 #ad

10-Inch. x 24 Teeth FTG Grind with 5/8-Inch. Bore, PTFE Coating, CMT 201.024.10 Industrial Ripping Saw Blade

#ad
CMT #ad - To be used on radial arm saws, miter saws, table and special saws. Micrograin carbide teeth to last longer and deliver smooth cuts. Non-stick ptfe coating keeps the blade running cool, reduces pitch build-up and protects against corrosion. For for fast, smooth, heavy-duty rip cuts on soft/hardwood Good performance on plywood. Technical details: kerf thickness 0126, 20° hook angle, plate thickness 0087, FTG -Flat Top Grind.
BrandCMT #ad
ManufacturerCMT #ad
Height0.13 Inches
Length10 Inches
Weight2 Pounds
Width10 Inches
Part Number201.024.10
Model201.024.10
WarrantyCMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits. CMT is not liable for damages to goods, property or persons, due to improper installation or misapplication of equipment.

9. CMT

 #ad

1FTG+ 4ATB Teeth with Shear with 5/8-Inch bore, 10 x 50 Teeth, CMT P10050 ITK Plus Combination Saw Blade

#ad
CMT #ad - Special carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion. Use on radial arm saws, miter saws, circular saws, table saws for cutting soft/hardwood & plywood. The large gullets allow deep cuts and effective chip clearance. Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed. 0094 kerf thickness, 0063 plate thickness, 15° cutting angle, 1 Flat and 4 Alternate Teeth grind. For rip/crosscuts on wood.
BrandCMT #ad
ManufacturerCMT USA #ad
Height0.09 Inches
Length10 Inches
Weight0.99 Pounds
Width10 Inches
Part NumberP10050
ModelP10050

10. CMT

 #ad

10-Inch x 40 Teeth 20° ATB Grind with 5/8-Inch Bore, PTFE Coating, CMT 213.040.10 Industrial General Purpose Saw Blade

#ad
CMT #ad - 0126 kerf thickness, 0098 plate thickness, 18° hook angle, 20° Alternate Top Bevel Grind. To be used on adial arm saws, miter saws, table and special saws. Good on plywood. Non-stick ptfe coating keeps blade running cool, reduces pitch buildup, protects against corrosion. Micrograin carbide teeth to last longer and deliver smooth cuts. Excellent rip and crosscut on wood. For rip and crosscuts with exceptional finish.
BrandCMT #ad
ManufacturerCMT #ad
Height0.13 Inches
Length10 Inches
Weight2 Pounds
Width10 Inches
Part Number213.040.10
Model213.040.10
WarrantyCMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits. CMT is not liable for damages to goods, property or persons, due to improper installation or misapplication of equipment.

30-90% Disocunts Found!

We found that some of the products on this list are now discounted on Amazon! Do you want to see these products?

Disclaimer: We earn small fee from purchases made on Amazon.

Tags: