Top 9 ZEROPLAY 360 Sled Kit – Woodworking Project Kits

As an Amazon Associate I earn from qualifying purchases.



ZEROPLAY 360 Sled Kit

MICROJIG #ad - Compatible miter tracks include but not exclusive to: SawStop, Bosch 4100, Powermatic, Delta Unisaw, Rigid, Dewalt, and General 350 Tracks. A true microjIG Innovation. Zeroplay miter bars will fit any standard 3/4” x 3/8” t-track miter slot that measures between 0 Top-down installation for easy and fast mounting to jigs, fixtures and sleds. 79" wide and at least 5/16" deep. Made in the usa. Zeroplay miter bar’s hassle-free miter bars using One-Touch Calibration. 73" and 0 . 360 degrees of adjustability. No slop, side-to-side play or seasonal warping.
ManufacturerMicro Jig #ad
Height19.69 Inches
Length7.09 Inches
Weight0.39 Pounds
Width9.84 Inches
Part NumberDV-360ZPB1
WarrantyExtended 3-Year Manufacturer's Warranty from Authorized Dealers Only



ZEROPLAY Miter Bars by MICROJIG Double Pack

MICRO JIG #ad - Build table Saw Sleds Fast. Zeroplay miter bars will fit any standard 3/4” x 3/8” t-track miter slot That Measures Between 073" and 079" wide and at least 5/16" Deep. Top-down installation for easy And Fast Mounting To Jigs, Fixtures And Sleds. No slop, side-to-side Play Or Seasonal Warping.
BrandMICRO JIG #ad
ManufacturerMICROJIG, Inc. #ad
Height1 Inches
Length10 Inches
Weight0.64 Pounds
Width1 Inches
Part NumberZP9-B2S2
WarrantyExtended 3-Year Warranty from Authorized Resellers



MATCHFIT Dovetail Clamp Pro

MICROJIG #ad - Revolutionary all-in-one MATCHFIT Package. Dovetail clamps and hardware move through the dovetail grooves below the surface of the material. Create your own Adjustable fences, stops, and sleds. Versatile hold-down Clamps for any table saw sled and woodworking jig. You can route your own tracks to build versatile jigs, fixtures, and hold-downs. Create your own Adjustable fences, stops, and sleds.
ManufacturerMATCHFIT #ad
Height11.12 Inches
Length2.25 Inches
Weight0.19 Pounds
Width7.25 Inches
Part NumberDVC-1177K2
WarrantyExtended 3-Year Manufacturer's Warranty from Authorized Dealers Only



INCRA MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence

INCRA #ad - Ten expansion disks adjust both sides of the bar for zero side play. The sled with t-track and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle. The right-hand portion of the sled, once cut. Table saw that blends incremental angle control and a special 3-panel sled. Hold down clamp locks your work piece onto the sled. 364 lock solid angle stops in 1/2-degree increments. Capitalizing on a great idea, the folks at Incra. Precision angle indexing teeth are laser cut in solid steel.
BrandINCRA #ad
ManufacturerIncra #ad
Height3.7 Inches
Length37.8 Inches
Weight31.4 Pounds
Width25.9 Inches
Part NumberMITER5000



KREG KMS7102 Table Saw Precision Miter Gauge System, Blue

KREG #ad - Our extremely straight 24 inch 610mm anodized-aluminum bar is 3/8 inch9. 5mm thick by 3/4 inch19mm wide and features five bar adjusters that you can use to eliminate “play” in the miter slot with the turn of a screwdriver. Microadjuster allows additional angle adjustment to 1/100th degree. Positive stops at 0, 10, 22-1/2, 30 and 45-degrees; limited lifetime warranty. Factory calibration. Vernier scale allows fast, 1/10th-degree angle adjustments. Guaranteed out of the box to. 003 accuracy of 6-inches. Gauge head is cnc machine perfectly square to the bar and table no stampings.
BrandKREG #ad
ManufacturerKreg #ad
Height6.25 Inches
Length25.25 Inches
Weight6 Pounds
Width2.63 Inches
Part NumberKMS7102

6. Fulton


Fulton DIY Table Saw Crosscut Sled Kit with 2 UHMW Bars 2 Aluminum Tracks 1 Knob and 1 Bolt along with Full Color HOW TO BUILD YOUR OWN Crosscut Sled Guide Booklet

Fulton #ad - If you own a table saw, you probably have come across a situation or two where you need to make smaller cuts or make cross cuts. The tracks that are included in this kit are made from solid extruded aluminum and are made in the USA. Each bar is approximately 3/4” x 3/8” which fits most standard table saw slots.

Another advantage is that UHMW won’t expand or contract like wood does during drastic weather changes. Make your crosscut sled to the size you want or need for your table saw and your specific cutting needs. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process. Uhmw bars are also slick and won’t leave any residue, dust or shavings behind like wooden bars tend to do. That’s when we decided to create this package with pre-cut UHMW bars, custom crosscut sled to fit your table saw! Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel.

Each track is cut to length for the perfect sub-fence on the crosscut sled. Each kit comes with 2 each 19” long by 3/4” by 3/8” uhmw bars, 2 each 12” long mini tracks, 1 each knob, 1 each 1/4” by 20 tpi bolt and a how to build your own crosscut sled guide book. Uhmw bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does. The included knob and bolt is for making a simple stop block which when finished, can slide the length of either track along the sub-fence.
BrandFulton #ad
ManufacturerFulton Woodworking Tools and Accessories #ad
Part Number11577



Kreg Crosscut Station

KREG #ad - Mdf base and backboard act as sacrificial surface for splinter-free cutting. A kerf line you cut into the MDF base shows exactly where your saw will cut. Material support wings with detachable blocks add offcut support for long pieces. Crosscut up to 12" wide 305mm and make a variety of miter cuts from 0° to 45°. Works with left- or right-blade circular saws.
BrandKREG #ad
ManufacturerKreg #ad
Height9.1 Inches
Length9.1 Inches
Width9.1 Inches
Part NumberKMA4100
Warranty1 year limited



Micro Jig DVC-538K2 MATCHFIT Dovetail Clamps

MICRO JIG #ad - Eliminate the need for expensive T-tracks and groove your own tracks. Compatible with 3/4" x 3/4" dog holes for quick hold-downs. Featuring new soft-grip handle. Universally compatible with any 1/2" 14-degree dovetail router bit profile. Clamp anywhere with a dovetail groove. Unique clamp shape slides into dovetail wood tracks and grooves for fast and easy clamping. Work smarter and build taller table saw fences, straight line sleds, and 100s of new clamping jigs. Note: dovetail Router Bit is not included.
BrandMICRO JIG #ad
ManufacturerMICROJIG #ad
Height8 Inches
Length4.5 Inches
Weight1.5 Pounds
Width1 Inches
Part NumberDVC-538K2
WarrantyExtended 3-Year Manufacturer's Warranty from Authorized Dealers Only



8-1/4-Inch DWE7485, Compact, DEWALT Table Saw for Jobsite

DEWALT #ad - Easy adjustments: rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate. Portability: Compact size for ease of transportation and storage. Power: 15 amp, 5800 rpm motor. Variety of cuts: 24. 5 inches of rip capacity for ripping 4x8 plywood or OSB sheets. Onboard storage: onboard storage provides easy access to the site pro guarding components and push stick when not in use. Guaranteed tough: Metal roll cage ensures job site durability.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height13 Inches
Length22.75 Inches
Weight54 Pounds
Width22.75 Inches
Part NumberDWE7485