Top 9 4-1/4 Carbide Grit Hole Saw – Hole Saws

As an Amazon Associate I earn from qualifying purchases.

1. MAGBIT

#ad

MAG-8967 625.6616 MAG625 4-1/8-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth, MAGBIT

#ad
MAGBIT #ad - Works in rotary and SDS hammer mode, works forward and reverse. Cuts brick, fiber cement siding & backer board, stucco, concrete block, old plaster.1-3/8-inch depth. Drilling a hole through concrete block takes less than 7 seconds. Use standard or SDS shank arbors.
BrandMAGBIT #ad
ManufacturerMagnus Industries Inc. #ad
Height2.4 Inches
Length6.3 Inches
Weight1.05 Pounds
Width5.2 Inches
Part NumberMAG-8967
Model625.6616
WarrantyReturn defective products to place of purchase for exchange or credit. Warranty does not apply to damage caused by abuse, misuse or alteration.

2. Starrett

#ad

Starrett CT414 Carbide Tipped HOLESAW 4-1/4", Black

#ad
Starrett #ad - Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Will cut nail embedded wood or virtually and wood and metal combination and suitable for use in mains and battery operated tools. A cost effective solution for cutting nail imbedded wood, or wood and metal combination, reinforced concrete and fiberglass. Tungsten carbide tipped teeth for outstanding cutting performance and product durability. 1-5/8-inches cutting depth.
BrandStarrett #ad
ManufacturerStarrett #ad
Height0.39 Inches
Length0.39 Inches
Weight2 Pounds
Width0.39 Inches
Part NumberCT414
ModelCT414

3. MAGBIT

#ad

MAGBIT 625.6416 MAG625 4-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth

#ad
MAGBIT #ad - Use standard or SDS shank arbors. Cuts brick, stucco, concrete block, fiber cement siding & backer board, old plaster. 1-3/8-inch depth. Drilling a hole through concrete block takes less than 7 seconds. Works in rotary and SDS hammer mode, works forward and reverse.
BrandMAGBIT #ad
ManufacturerMagnus Industries Inc. #ad
Weight0.77 Pounds
Part NumberMAG-9015
Model625.6416
WarrantyReturn defective products to place of purchase for exchange or credit. Warranty does not apply to damage caused by abuse, misuse or alteration.

4. BOSCH

#ad

Black, BOSCH HDG418 4-1/8 In. Diamond Hole Saw

#ad
BOSCH #ad - One-inch maximum cutting depth. Remove material plugs quickly, easily. Vacuum-brazed diamond grit cuts faster and lasts longer. Segmented teeth reduce debris and heat.
BrandBOSCH #ad
ManufacturerBosch #ad
Height0 Inches
Length0 Inches
Weight1.09 Pounds
Width0 Inches
Part NumberHDG418
ModelHDG418
WarrantyNo

5. Blue Boar

#ad

Blue Boar Recessed Light Carbide Grit Hole Saw 4-3/8” Dia for 4 inch Lights: Fast Cutting in Drywall, Lath & Plaster, Hardi Board: Easy Plug Removal uses Standard 5/8 18 Thread Hole Saw Arbor adptr

#ad
Blue Boar #ad - Ships within 1 business day from our nv warehouse. Continuous cutting edge for smooth cutting even in wood lath and plaster. Cuts through drywall, fiber cement Hardie board, acoustical tile, cornHole board, plaster, ceiling tile.1" deep - hard tungsten carbide grit edge for a long life in abrasive materials. Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro XL-Arbor/Shield Kit or Hole Pro X-230+ model.
BrandBlue Boar #ad
ManufacturerHole Pro #ad
Weight0.44 Pounds
Part NumberHP1192
ModelHP1192

6. Milwaukee

#ad

Milwaukee 4-1/4 in. Big Hawg Carbide Hole Saw

#ad
Milwaukee #ad - 50x life for heavy duty application, cuts up to 1000+ nails. 10x larger carbide teeth for 5X faster cuts in nail-embedded wood. Best solution for cement board shingles, plaster, stucco and more. Item package Weight: 1. 9 lb.
BrandMilwaukee #ad
ManufacturerMilwaukee Electric Tool Corp #ad
Height1.1 Inches
Length2.4 Inches
Weight0.1 Pounds
Width4.25 Inches
Part Number49-56-9255
Model49-56-9255

7. 3 otters

#ad

Diamond Drill Bit Set Hole, 15PCS Hole Saw Set for Glass, Marble, Granite Stone

#ad
3 otters #ad - Wide usageused on drill glass, slate mable, Wood, Ceramic, Granite Light Stone, Blocks Jars, Tile Bottles, and other hard surfaces. Attentionplease keep adding water when the diamond drill bits are working on the glass or ceramics.

Low drill pressure and increased use of water lubrication will extend drill bit life. Glass drill bitthese diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. Fine workmanship and super wear-resistant, sharp. Tile hole saw 15 sizes 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20/ 22/ 25/ 26/ 28/ 30/ 40/ 50 mm,to meet various demands. High quality drilleach hole is treated with smooth and accurate surface treatment, and the top oh the hole is thickened to achieve excellent cutting strength.
Brand3 otters #ad
ManufacturerJohouse #ad
Height2 Inches
Length2 Inches
Weight0.79 Pounds
Width2 Inches
Part NumberJOHO167
ModelJOHO167

8. Blue Boar

#ad

Lath & Plaster, Hardi Board: Easy Plug Removal uses Standard 5/8 18 Thread Hole Saw Arbor adptr, Blue Boar Recessed Light Carbide Grit Hole Saw 6-3/8” Dia for 6 inch Lights: Fast Cutting in Drywall

#ad
Blue Boar #ad - Cuts through drywall, cornHole board, plaster, acoustical tile, fiber cement Hardie board, ceiling tile. Continuous cutting edge for smooth cutting even in wood lath and plaster. Ships within 1 business day from our nv warehouse. Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro HP1156 Large shield and Arbor kit. 1" deep - hard tungsten carbide grit edge for a long life in abrasive materials.
BrandBlue Boar #ad
ManufacturerHole Pro #ad
Weight0.88 Pounds
Part NumberHP1194
ModelHP1194

9. HLOFIZI

#ad

HLOFIZI 4-3/8 Hole Saw for 4" Recessed Lights, Carbide Grit Holes Saw Cutting Plaster Drywall Ceiling Sheetrock

#ad
HLOFIZI #ad - We sincerely apologize and will definitely send you the new ones in no time. Perfect hole size - solid welded construction helps provide accurately sized holes for recessed lighting, leaves just enough space that 4" can light fixture fits.

Long life - hard tungsten carbide grit hole saw edge for a longer life in abrasive materials. Continuous rim for clean cut without chips or cracking the plaster. They are the key tools to develop and improve our handmade and heartcrafted products. Open back design allows for quick and easy plug removal. Fast easy clean cutting - hlofizi 4-3/8 hole saw for recessed Lights allows for smooth cut hole in ceiling plaster and dry wall.

Multi-application - perfect cut through drywall, plaster, lath and plaster, wood and stucco. This hole saw for plaster for any recessed light installation job. Satisfactory service: if our hlofizi carbide grit holes saw you received is defective or unsatisfactory. We appreciate all your remarks and comments.
BrandHLOFIZI #ad
ManufacturerFaith Tools #ad
Height1.5 Inches
Length4.3 Inches
Width4.3 Inches
Part NumberNEWBMHS438PRO
ModelNEWBMHS414G