Top 8 AIR COMPRESSOR CHECK VALVE – Air-Compressor Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Conrader

#ad

New In tank Check valve for air compressor 1/2" comp x 1/2" mpt

#ad
Conrader #ad - Used to prevent backflow of air. 1/2" npt x 1/2" compression Air Compressor in Tank Check Valve. 1/8" female npt threads on the side for an unloader port.
BrandConrader #ad
ManufacturerConrader #ad
Weight0.15 Pounds
Part NumberC5050T

2. Hromee

#ad

Hromee Air Compressor Replacement Components Brass 1/2 Inch MNPT Compressor in Tank Check Valve Kit with Three Different Unloader Tube Fittings 20 SCFM 4 Pieces

#ad
Hromee #ad - Connection size - 1/2" mnpt tank check valves are used to keep air volume and pressure from escaping back into compressor heads while not operating. Two fittings - the valves check valves are all brass and It comes with 2 different unloader fittings, barbed and push to fit for the 1/4” nylon unloader tubing.

The 1/8" fnpt side port is designed for pressure switch application. It can be disassembled for cleaning and repairing. Maximum pressure of 450 PSI and air flow of 20 SCFM. Function - the hromee check valve kit is used to prevent backflow in a piping system is known as a check valve. The pressure of the fluid passing through a pipeline opens the valve, while any reversal of flow will close the valve.

It allows full unobstructed flow and automatically shuts as pressure decreases. We offer 30-day return with no reason. Construction - one piece brass body stainless steel springs glass filled fluoropolymer poppets for positive sealing and long term reliability. Consult your owner’s manual to find if this check valve fits your air compressor. Compatiable - hromee check valve kit is used to replace the check valve on some brands of air compressor.
BrandHromee #ad
ManufacturerHromee #ad
Height1 Inches
Length4 Inches
Weight4.5 ounces
Width4.6 Inches
Part NumberHR4011

3. CDI/Conrader/Steuby

#ad

New In tank Check valve for air compressor 3/8" comp x 1/2" mpt

#ad
CDI/Conrader/Steuby #ad - Outlet male threads: _” npt which measure about 26/32” in diameter these threads are the male threads that screw into the air tank. Air inlet threads: 3/8” compression which measure about 16/32” in diameter. This port is used for a un-loader line, some compressors do not have this if yours does not you would just plug this port. 1/2" npt x 3/8" compression Check Valve. Brass. Side un-loader port: 1/8” female npt threads, which measure about 10/32” in diameter.
BrandCDI/Conrader/Steuby #ad
ManufacturerConrader #ad
Weight0.15 Pounds
Part NumberC3850T

4. CDI/Conrader/Steuby

#ad

New In tank Check valve for air compressor 1/2" FPT x 1/2" MPT

#ad
CDI/Conrader/Steuby #ad - Brass. 1/2" male npt x 1/2" female NPT Check Valve. Side un-loader port: 1/8” female npt threads, which measure about 10/32” in diameter. Outlet threads: male npt which measure about 26/32 in diameter these threads are the male threads that screw into the air tank. This port is used for a un-loader line, some compressors do not have this if yours does not you would just plug this port. Air inlet threads: 1/2"  female npt which measure about 24/32 in diameter.
BrandCDI/Conrader/Steuby #ad
ManufacturerConrader #ad
Part Number43211-1866

5. Preamer

#ad

Preamer 3-Port Brass Male Threaded Air Compressor Check Valve Central Pneumatic, G1/8x G3/8x G1/2

#ad
Preamer #ad - Male thread size: g1/8, G3/8, G1/2. Excellent replacement for the old or broken check valve of your air compressor. The three male thread connectors are respectively for tube connecting, air pressure tank and compressor piston pump. This foam bottle sprays foam all over the vehicle creating the "snow bath effect".
BrandPreamer #ad
ManufacturerPreamer #ad

6. conrader

#ad

New In tank Check valve for air compressor 3/4" comp x 3/4" mpt

#ad
conrader #ad - This port is used for a un-loader line, some compressors do not have this if yours does not you would just plug this port. Outlet male threads: 3/4 npt which measure about 1 1/32 in diameter these threads are the male threads that screw into the air tank. 3/4" compression x 3/4" NPT Check Valve. Brass. Air inlet threads: 3/4 compression which measure almost 1 in outside diameter / about 63/64". Side un-loader port: 1/8 female npt threads, which measure about 10/32 in diameter.
Brandconrader #ad
ManufacturerConrader #ad
Part NumberC7575T

7. CDI/Conrader/Steuby

#ad

New In tank Check valve for air compressor 1" FPT x 1" MPT

#ad
CDI/Conrader/Steuby #ad - Air inlet threads: 1 female npt which measure about 1-8/32 in diameter. If your does not, you would just plug this port. These threads are male threads that screw into the air tank. This port is used for a un-loader line, some compressors do not have this. Side un-loader port: 1/8 female npt threads, which measure about 10/32 in diameter. 1" x 1" brass Check Valve. Outlet threads: 1 male npt which measure about 1-9/32 in diameter.
BrandCDI/Conrader/Steuby #ad
ManufacturerConrader #ad
Weight0.77 Pounds
Part Number43211-2913

8. CHECK VALVE

#ad

UNLOADER PORT,, IN TANK CHECK VALVE AIR COMPRESSOR 3/8" COMPRESSION INLET X 1/2" MALE NPTOUTLET, ALL BRASS CONSTRUCTION

#ad
CHECK VALVE #ad - Top inlet designed to be used with 3/8" od refrigeration type copper tubing, nut and ferrule not included. Replaces makita, devilbiss, black and decker, champion, speedaire, campbell hausfeld and many others. 20 scfm, 1/8" female npt unloader located side of the hex, 350 psi max, plug if not needed. All brass construction, 400 degrees ferenhiet max temp, made in usa, 400 psi max pressure.3/8" compression top inlet x 1/2" male npt outlet to receiver tank.
BrandCHECK VALVE #ad
ManufacturerCONRADER #ad
Part NumberCTLD3812
ModelCTLD3812