Top 10 Vice For Workbench – Bench Vises
As an Amazon Associate I earn from qualifying purchases.
TEKTON #ad - Cast iron construction 30, 000 PSI tensile strength with replaceable serrated steel jaws holds work with a sure, nonslip grip. Three mounting holes anchor vise securely to workbench.
HENGDA VISE #ad - Easy installation : it can be installed at the edge of all kinds of desktop, Can hold the fixed platform thickness 2. 0"50mm, no holes need to be punched in the desktop during installation, quick and easy disassembly.
Good protection of holding objects, reducing damage to objects. Home vise:, maximum with of jaw opening is 2. 2"（55mm, jaw width 2”（50mm, Vise Net weight 1470g.
Extensive use: home vise stand it can hold many kinds of parts, and the O-shape Swivel base allows vise rotating 360-Degree in wide range of tasks，The bench vise uses a solid integrated pipe clamp for iron casting to keep the workpiece stable.
MYTEC #ad - The table board up to 2. 4 inches thick can be clamped. Tips: please carefully browse our product photos to understand the size of each part of the vise before place an order. Protect table top: during installation, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts To ensure good use of rubber gaskets, please refer to the product picture before use.
Wide range of uses: this vise can hold a variety of parts，O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work;.
We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason. We welcome you to contact us at any time, we will provide you with a satisfactory solution. Easy to install: this bench vise can be installed on the edge of all kinds of desktops. Home vise: net weight 3. 31 lbs, maximum width of jaw opening 2. 5 inch, Jaw width 2.
Keter #ad - Less than 30 second setup: Unique quick opening and folding system for easy storage and portability. Less than 30 lbs: with its lightweight design and sturdy carrying handle, take your workbench just about anywhere.
W x 29. 75 in. H / folded: 33. 46 in. Versatile use: perfect for any kind of project – DIY projects, home improvement, commercial construction work, table saw use, painting, and more.
Yost Tools #ad - 62". Jaw width: 4. 360-degree swivel base with 2 lock downs adjusts the direction of the jaws for proper placement. 52" pounding surface. Base mounting tabs: 4 x 7/16"D. 43"d x 6. 5" x jaw opening: 4" x Throat Depth: 2. 2.
Forward #ad - Perfect dual-purpose vises: this 5" vise is suitable for both industrial and DIY home use. Great for clamping and fixing workpiece: higher clamping force; Longer opening; Bigger anvil; Deeper throat depth; Wider jaw; Round workpiece clamping; Microgroove tooth space for better grip; 360 degree swivel base providing unlimited clamping space.
Jaw width:125mm5", opening: 125mm5", throat Depth: 67mm2. 6", clamp force: at least 5500lbs.
BestEquip #ad - Precision & hardness- polishing lead screw and guide rail are upgraded to achieve high precision and high hardness. Heavy-duty construction- made of ductile iron which increases the durability and longevity, this table vise is designed to be used in a tough environment.
Sufficient clamping capacity- the built-in jaws are grooved for enhanced grip and allow for easy clamping of pipe and other rounded material. The workbench vise can clamp and tighten quickly and smoothly after precise grinding.
PUPUKA #ad - Compact and lightweight: the bench vise is so small and lightweight so that it hardly takes up space on your table and can easy be carried around. Wide applicability: small as it is, woodworking, hobby, it's useful. The table clamp is great for crafts, jewelry and model making.
WXTOOLS #ad - Excellent material｝: - the woodworking clamp is made of high-grade cast iron, surface spray treatment, corrosion resistant and more comfortable. The woodworking vise is suitable for a wide range of clamping angles. Universal bench vice｝: - maximum opening of jaw is up to 3 inch/77.
5mm, jaw width 2. 75 inch/70mm, this table vise fits most workbench, and kinds of thickness of tables. Wide usage｝: - ideal for home, such as cutting conduit, workshop, drilling, gluing, providing clamping, educational institution, clocks, suitable for rivets, sawing and so on, crimping and rolling function for light applications, sanding or planing, and professional use, woodworking, factory, metalworking, clamps.
4 inch/ 61 mm is easy to install that it can easily clamp on the edge of all kinds of desktops, effortless and time-saving, convenient to use. The high-quality screw clamp makes the clamped workpiece firmer without slipping. The jaw adopts quenching and re-fire technology to increase its hardness and strength, which is durable for long-term use and reliable to grip. 360-degree swivel base｝: - designed with 360 degree swivel base, fully solid inner disc, steering adjustable and flexible.
Fashionclubs #ad - Clamp down any wooden block for sanding, grinding, carving, drilling, chiseling, detail, and much more;. Simply turn the bar on top to open and close the clamp onto a table surface and then turn the screw to securely clamp any small objects to work on;.
This vise is incredibly easy to use for anyone. A handy miniature vise, electronics, Model making, ideal for holding small parts in Jewelry, hobby, Home and Work-Bench many more applications;.
1. TEKTON
#adTEKTON 4-Inch Swivel Bench Vise | 54004
#adMore information #ad
Polished steel anvil offers a smooth, consistent work surface for shaping metal pieces. 120-degree swivel base with dual lock-down nuts positions workpiece where you need it. Acme-threaded screw glides smoothly without binding.| Brand | TEKTON #ad |
| Manufacturer | TEKTON #ad |
| Height | 5.6 Inches |
| Length | 10.6 Inches |
| Width | 4.8 Inches |
| Part Number | 54004 |
| Model | 54004 |
| Warranty | Always Guaranteed: [email protected] |
More information #ad
2. HENGDA VISE
#ad2.0 "blue, HENGDA Mini Table Clamp Home Vise Clamp-On Vise New upgraded nylon jaws more suitable for clamping electronic coils Jewelers Hobby Clamps Craft Repair Tool Portable Work Bench Vice
#adGood protection of holding objects, reducing damage to objects. Home vise:, maximum with of jaw opening is 2. 2"（55mm, jaw width 2”（50mm, Vise Net weight 1470g.
More information #ad
Mini table clamp plated steel screw and handle，Equipped with a 38mmx28mm anvil for ease of use. New upgraded: mini table bench vise new upgraded nylon jaws more suitable for clamping electronic coilsr holding small parts in Jewelry, Model making, Electronics, Hobby, Home and Work-Bench. Extensive use: home vise stand it can hold many kinds of parts, and the O-shape Swivel base allows vise rotating 360-Degree in wide range of tasks，The bench vise uses a solid integrated pipe clamp for iron casting to keep the workpiece stable.
| Brand | HENGDA VISE #ad |
| Manufacturer | jilinhangdataiqianchang #ad |
| Weight | 3.24 Pounds |
| Part Number | tai-012345 |
More information #ad
3. MYTEC
#adMYTEC Home Vise Clamp-On Vise，2.5"
#adWide range of uses: this vise can hold a variety of parts，O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work;.
More information #ad
Convenient and quick to install and remove;. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, there is no need for punching on the table, secure it in the end;. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason. We welcome you to contact us at any time, we will provide you with a satisfactory solution. Easy to install: this bench vise can be installed on the edge of all kinds of desktops. Home vise: net weight 3. 31 lbs, maximum width of jaw opening 2. 5 inch, Jaw width 2.
| Brand | MYTEC #ad |
| Manufacturer | linyihedongmeikegongjuyouxiangongshi #ad |
| Height | 3.15 Inches |
| Length | 7.4 Inches |
| Width | 6.34 Inches |
| Part Number | . |
| Model | . |
More information #ad
4. Keter
#adWoodworking Tools and Accessories with Included 12 Inch Wood Clamps – Easy Garage Storage Black/Yellow, Keter, 197283 Folding Table Work Bench for Miter Saw Stand
#adW x 29. 75 in. H / folded: 33. 46 in. Versatile use: perfect for any kind of project – DIY projects, home improvement, commercial construction work, table saw use, painting, and more.
More information #ad
Accessories included: Includes two 12 inch clamps to secure a variety of working materials. H. Durable and strong: Weather-resistant polypropylene construction prevents rusting, peeling, and denting. L x 21. 65 in. L x 21. 65 in. Resin construction: made of heavy-duty resin with aluminum legs and a work space capacity of 1000 lbs. Dimensions: standing: 33. 46 in. W x 4. 4 in.| Brand | Keter #ad |
| Manufacturer | Keter #ad |
| Height | 29.7 Inches |
| Length | 21.7 Inches |
| Weight | 26.95 Pounds |
| Width | 33.5 Inches |
| Part Number | 197283 |
| Model | 197283 |
| Warranty | 2 year Warranty |
More information #ad
5. Yost Tools
#adBlue, Yost Tools Vises 445 4.5" Heavy-Duty Utility Combination Pipe and Bench Vise
#adMore information #ad
Replaceable Hardened Steel Serrated Top Jaws. 64" x 2. High-strength steel bar and 30, 000 psi cast iron vise components. Pipe capacity: 1/8" x 2" Diameter, pipe jaws are cast-in place. 5"long handle with rubber bumpers. Machined steel main screw with rolled threads. 0 And torque rating: 73 Ft-Lb. Clamp force: 3, 150 lbs.| Brand | Yost Tools #ad |
| Manufacturer | Yost Tools #ad |
| Height | 8 Inches |
| Length | 0 Inches |
| Weight | 17 Pounds |
| Width | 6 Inches |
| Part Number | 445 |
| Model | 445 |
More information #ad
6. Forward
#adForward DT08125A 5-Inch Heavy Duty Bench Vise 360-Degree Swivel Base and Head with Anvil 5"
#adJaw width:125mm5", opening: 125mm5", throat Depth: 67mm2. 6", clamp force: at least 5500lbs.
More information #ad
Tapping work can also be done on the anvil of bench vise. The front jaw can be rotated by 360 degree, more convenient for clamping works. More durable and sturdy: material updated, PSI 60, stationary body and floating body are all made from high strength ductile iron, 000. Multifunctional: mounting vise on the workbench, then you could do the work of grinding, cutting, and etc.| Brand | Forward #ad |
| Manufacturer | Forward #ad |
| Part Number | HY-DT08125A-5In |
More information #ad
7. BestEquip
#adBestEquip Bench Vise 6”,Heavy Duty Double Swivel Rotating Vise Head/Body Rotates 360° ,Pipe Vise Bench Vices 30Kn Clamping Force,for Clamping Fixing Equipment Home or Industrial Use
#adSufficient clamping capacity- the built-in jaws are grooved for enhanced grip and allow for easy clamping of pipe and other rounded material. The workbench vise can clamp and tighten quickly and smoothly after precise grinding.
More information #ad
Multifunctional tool- widely used in the industry or household. Mounting vise on the workbench, and fixing, clamping, then you could do the work of grinding, etc.360 degrees rotation- the head of the vise can be rotated by 360 degrees for extra versatility, and the swivel base of the vise allows for optimal work placement and flexibility. It is designed to withstand the clamping force30Kn.| Brand | BestEquip #ad |
| Manufacturer | BestEquip #ad |
| Height | 7.09 Inches |
| Length | 14.17 Inches |
| Width | 5.91 Inches |
More information #ad
8. PUPUKA
#adPupuka Mini Jeweler Table Clamp Portable Work Bench Vise Hobby Small Bench Vice Jewelers DIY Clamps Craft Table Repair Tool
#adMore information #ad
High quality: the bench Vice is made of stong and durable aluminum alloy. Package included: 1 x Vice Clamp. Easy to use: the vise is simple and easy to use, just turn the top rod to remove the clip or fit it to your workbench, then slowly turn the screw to firmly clamp any small objects to be processed.| Brand | PUPUKA #ad |
| Manufacturer | PUKAYANXUAN #ad |
| Height | 1.34 Inches |
| Length | 4.69 Inches |
| Width | 4.09 Inches |
| Part Number | pupuka16 |
More information #ad
9. WXTOOLS
#ad360° Rotating Swivel Base Bench Vise Heavy Duty Woodworking Clamps Home Vise Clamp-On Vise Movable Work Bench Vise For Woodworking, Universal 3 Inch Table Vise, Blue
#ad5mm, jaw width 2. 75 inch/70mm, this table vise fits most workbench, and kinds of thickness of tables. Wide usage｝: - ideal for home, such as cutting conduit, workshop, drilling, gluing, providing clamping, educational institution, clocks, suitable for rivets, sawing and so on, crimping and rolling function for light applications, sanding or planing, and professional use, woodworking, factory, metalworking, clamps.
More information #ad
Easy to install｝: - lengthened throat design throat capacity: up to 2. 4 inch/ 61 mm is easy to install that it can easily clamp on the edge of all kinds of desktops, effortless and time-saving, convenient to use. The high-quality screw clamp makes the clamped workpiece firmer without slipping. The jaw adopts quenching and re-fire technology to increase its hardness and strength, which is durable for long-term use and reliable to grip. 360-degree swivel base｝: - designed with 360 degree swivel base, fully solid inner disc, steering adjustable and flexible.
| Brand | WXTOOLS #ad |
| Manufacturer | WXTOOLS #ad |
| Part Number | tablevise-Blue |
More information #ad
10. Fashionclubs
#adFashionclubs Mini Table Vice Craft Bench Vise Work Bench Clamp Swivel Vice Hobby Craft Repair Tool
#adThis vise is incredibly easy to use for anyone. A handy miniature vise, electronics, Model making, ideal for holding small parts in Jewelry, hobby, Home and Work-Bench many more applications;.
More information #ad
This mini table vise is made of a heavy duty aluminum alloy that is not only lightweight, but incredibly durable;. Clamps onto a surface up to: 35mm Thick;.| Brand | Fashionclubs #ad |
| Manufacturer | fashionclubs #ad |
| Part Number | Mini Table Vise |
| Model | Mini Table Vise |
More information #ad