Top 10 SDS Drill bits – Rotary Hammer Drill Bits

As an Amazon Associate I earn from qualifying purchases.

1. Bosch

#ad

Bosch HC2084 1/2 In. x 12 In. SDS-plus Bulldog Rotary Hammer Bit

#ad
Bosch #ad - Optimized brazing and hardening process for long life. Proprietary Bosch hardening process results in more holes per bit. 15 percent faster compared to S4L. Ideal for anchoring and through-hole applications in concrete. Bosch-made carbide tip is tougher and more durable under heavy loads.
BrandBosch #ad
ManufacturerBosch #ad
Height1 Inches
Length1 Inches
Weight0.4 Pounds
Width1 Inches
Part NumberHC2084
ModelHC2084

2. Makita

#ad

Aggressive Drilling For Concrete & Masonry, Makita 5 Piece, SDS-Plus Drill Bit Set For SDS+ Rotary Hammers, Carbide Tipped Bits

#ad
Makita #ad - Makita’s sds+ drill bit set with case for 7/8" or greater sds-plus chuck rotary hammer drills | this set has 5 premium, Heavy-Duty, Reinforced Concrete, Long-Lasting, screwing and fastening into 4" Deep Heavy-Duty Masonry, Tungsten Carbide Bits for EASY & Reliable drilling, Tile, Brick & Cinder Block. Ideal for general contractors and construction industry that require heavy duty sds+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers.

Easily & smoothly drill 3-4x more into reinforced concrete, premium tungsten carbide & steel bit integrity for Unmatched EASE, brick and masonry by relying on makita’s reinforced, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.55 heavy-duty makita sds-plus drill bit set for medium 4" drilling depths includes: 1 bit of 3/16" + 1 bit of 1/4" + 1 bit of 5/16" + 1 bit of 3/8" + 1 bit of 1/2" will work on any sds+ rotary hammer with at least 7/8" Chuck Size, HR2661, HR2811F, XRH01Z, XRH04Z, HR2641X1, including the Makita HR2475, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills.

Avoid lower priced & lower quality bits that prematurely wear and strain or overheat the powertool, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, project completion delays, resulting in high bit consumption rate, allowing for EFFECTIVE and PRECISE drilling.
BrandMakita #ad
ManufacturerMakita #ad
Height3 Inches
Length7.25 Inches
Width0.75 Inches
Part Number1
ModelD-07973

3. Bosch

#ad

Bosch 7 Piece Carbide-Tipped SDS-plus Rotary Hammer Drill Bit Set with Storage Case HCK001

#ad
Bosch #ad - Reliable: unique wear marks alert when tips of bits wear beyond ANSI specification while the centric tip ensures quick starts and rounder holes. Portable: the included Brute Tough Storage Case allows for easy access, organizing and portability.

Versatile: set includes one of each hc2010, brick, hc2081, and two hc2041 for handling a wide variety of heavy-duty drilling applications including concrete, HC2061, hc2051, hc2040, block and more. Innovative: the bosch hck001 drill bit set features patent pending, optimized 4-flute design to reduce bit stress when drilling, keep the bit running cooler, and for fast dust removal. Longevity: bosch-made, carbide-tipped bit heads are harder, tougher and more resistant and durable to extreme loads for longer tool life and faster performance in masonry.
BrandBosch #ad
ManufacturerBosch #ad
Height0 Inches
Length0 Inches
Weight1.3 Pounds
Width0 Inches
Part NumberHCK001
ModelHCK001
Warranty1 Year

4. COMOWARE

#ad

COMOWARE Rotary Hammer Drill Bits Set & Chisels- SDS PLUS Concrete Masonry Hole Tool 17pcs with Storage Case

#ad
COMOWARE #ad - It allows for precise starts in materials such as reinforced concrete. High quality carbide material: it is featured in a harder YG8 Carbide tip and carbide steel body. Multifunctional using: the bit set includes 13pcs drill bits with 5.

5 mm, 12 mm, 7 mm, 5/16", 1/2", 1 point chisel, 1/4", 16 mm approx. Before using the hammer drill, and then combine the hammer drill to meet your processing needs. Professional and widely use: compared with percussion drills, electric hammer drills can generate stronger impact force lightly, you can use a chisel to make a point of strength, allowing for effective and precise drilling. The robust head is ideal for high impact applications.

3/16", 10 mm, 9/16", 6.5 mm, 3/8", 8 mm, 6 mm, 5/8", 14 mm, 2 flat Chisel and 1 U-groove Chisel. Sds chisel matches the electric hammer drill to punch hole for concrete, brick and wall, cut and chisel groove. Universal connection desigh: the sds - plus shank is suitable for most rotary hammer drills on the market and meets most of your needs. Convenient organization and storage: Come with a plastic index case, convenient to use and carry.
BrandCOMOWARE #ad
ManufacturerCOMOWARE #ad

5. SPKLINE

#ad

10mm Diameter Shank Fits Bosch Dewalt Milwaukee Hilti and Other SDS-Plus Rotary Hammer Drills, SPKLINE SDS-Plus Ground Rod Driver for 5/8 Inch and 3/4 Inch Ground Rods, 13/16"X 6-11/16"20X170mm

#ad
SPKLINE #ad - A taper on the bottom of the driver throat makes contact with the top of the ground rod. 6-11/16"170mm long and 13/16"20mm diameter socket opening, 3"76mm deep inside the nest, accommodate ground rods up to 3/4" 19mm in diameter.

Fantastic work saver. Industrial grade professional ground rod driver for 5/8" and 3/4" ground rods. Standard sds-plus shank 10mm diameter is compatible with Bosch, Dewalt, Milwaukee, Makita, Hilti, Hitachi and all other brand SDS-Plus system rotary hammers and Hammer Drills. It saves you a lot of pounding with a manual hammer. Product is packed in a handy transparent plastic tube that is durable and convenient to store and carry.

One-piece design with proprietary heat-treatment process, fully hardened high quality steel body and thick metal walls meet the demands of frequent use and deliver increased life and durability. Heavy duty, precise and effortless, high efficiency, perfect for commercial and industrial applications. It helps to minimize the mushrooming of the rod versus a flat-bottom driver.
BrandSPKLINE #ad
ManufacturerSPKLINE #ad
Height0.98 Inches
Length6.69 Inches
Weight0.62 Pounds
Width0.98 Inches

6. Bosch

#ad

Carbide Tipped, Bosch HC2129 3/4-Inch by 37-Inch by 39-Inch Bulldog SDS-Plus Shank

#ad
Bosch #ad - Flute design optimized for fast dust removal. Designed for fast drilling into concrete. Diameter: 3/4-inch, useable length: 37-Inches, Overall Length: 39-Inches. Optimized brazing and hardening process for long life.
BrandBosch #ad
ManufacturerBosch #ad
Height43.25 Inches
Length0.75 Inches
Weight0.68 Pounds
Width1.63 Inches
Part NumberHC2129
ModelHC2129

7. Bosch

#ad

Bosch HC2083 1/2 In. x 8 In. SDS-plus Bulldog Rotary Hammer Bit

#ad
Bosch #ad - Proprietary Bosch hardening process results in more holes per bit. Optimized brazing and hardening process for long life. 15 percent faster compared to S4L. Bosch-made carbide tip is tougher and more durable under heavy loads. Ideal for anchoring and through-hole applications in concrete.
BrandBosch #ad
ManufacturerBosch #ad
Height12 Inches
Length0.5 Inches
Weight0.28 Pounds
Width1.63 Inches
Part NumberHC2083
ModelHC2083

8. DEWALT

#ad

1/2-Inch by 16-Inch by 18-Inch DW5440, Rock Carbide, DEWALT SDS+ Hammer Bit

#ad
DEWALT #ad - Elongated four Flute Helix for Faster Material Removal. Rock carbide tip for longer bit life. Rock carbide tip for longer Bit Life. Elongated four flute helix for faster material removal. Increased steel prevents breakage. For use with electric or cordless rotary hammers. Used for drilling holes in poured concrete and other masonry up to 1-1/8" diameter. Increased Steel Prevents Breakage.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height21.25 Inches
Length1.88 Inches
Weight0.55 Pounds
Width0.5 Inches
Part NumberDW5440
ModelDW5440
Warranty1 Year Full Warranty

9. DEWALT

#ad

3/4-Inch by 10-Inch by 12-Inch DW5455, DEWALT SDS+ Hammer Bit, Rock Carbide

#ad
DEWALT #ad - Rock carbide tip for longer bit life. Elongated four flute helix for faster material removal. Elongated four Flute Helix for Faster Material Removal. Increased Steel Prevents Breakage. Rock carbide tip for longer Bit Life. For use with electric or cordless rotary hammers. Used for drilling holes in poured concrete and other masonry up to 1-1/8" diameter. Increased steel prevents breakage.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height0.28 Inches
Length14.54 Inches
Weight0.7 Pounds
Width0.82 Inches
Part NumberDW5455
ModelDW5455
Warranty1 Year Full Warranty

10. ZINMOND

#ad

CEMENT, ZINMOND 11-Piece SDS-plus Rotary Hammer Drill Bits Set & 3-Piece Chisels, STONE, Carbide-Tipped Masonry Bit Set for BRICK, SDS plus bits

#ad
ZINMOND #ad - The sds plus drill bit especially ideal for drill holesin concrete, stone and masonry. High quality carbide-tipped bit- the tungsten carbide bit heads are more stable, brick, harder, durable, faster and easier under heavy loads. Widely use-the sds plus shank is suitable for most rotary hammer drills on the marketlike BOSCH, stone, masonry, brick, MAKITA, Milwaukee, etc and meets most of your needs.

Perfect flute design-the wider and deeper u-shaped flute design, keep the bit running smoothly and make the bit run cooler, reduce bit stress when drilling, cleans debris out fast, work time longer. The smaller grooves fix bit in the chuck. The larger grooves allow bits slipping in the chuck when working, enhancing the drilling torque and hammering energy without skid.

Special anti-skid sds plus shank- the handle has four grooves. 11 pcs sds-plus drill bits- set includes: 8pcs hammer drill bit1/4 x 4-inch, 1/2 x 6-inch, 1/4 x 6-inch, 9/32 x 6-inch, 0.82*6inch flat, 3/16 x 6-inchand 3pcs drill chisel1/2 x 6inch tip, 5/16 X 6-inch, 3/7 X 6-inch, 5/16 X 4-inch, 1.57*6inch flat. Sds chisel matches the electric hammer drill to punch hole for concrete, Dewalt, and wall.
BrandZINMOND #ad
ManufacturerZINMOND #ad