Top 10 Savannah Carbide Turning Tool Mini Size – Lathe Turning Tools

As an Amazon Associate I earn from qualifying purchases.

1. Savannah

#ad

Savannah 3 Piece Carbide Mini Turning Tool Set with Flush Fit Comfort Grip Hardwood Handles | Steel Riveted Ferrules and 2 ea Round 2 ea 4 inch Radius Square and 2 ea Diamond Shaped Carbide Cutters

#ad
Savannah #ad - Diamond shaped carbide cutters, 5 ea. Take your time and significantly slow down the rate of movement across the surface of the wood. Remember; the slower your travel the tool, the cleaner and smoother the final cut will be. 4 inch radius square tool, 1 ea.

This will give the cutter more time to make cleaner, smoother cuts. This will substantially prolong the life of your finishing cutter. Also included with this set is a thick, heavy duty carrying case with a removable foam tray liner. 4" radius square carbide cutters, 1 ea. Carbide cutters will stay sharper longer when compared to standard turning tools. The tray can be removed so the carrying case can be repurposed for any type of tool or accessory storage you choose.

Forcing the tool into your stock will not produce optimal results. However, simply loosen the cutter screw, rotate the tip and secure the screw for a fresh, once needed, the cutters are replaceable. Screws for securing cutters and 2 ea. Diamond shaped tool, 2 ea. Unlike standard wood turning tools, when using carbide tipped cutters, you keep the cutter straight in on the object you are turning. Each handle is approx.
BrandSavannah #ad
ManufacturerSavannah #ad
Height4 Inches
Length15 Inches
Weight3.1 Pounds
Width11 Inches
Part Numbersav3pc
Model7382

2. Savannah

#ad

Savannah 3 Piece Carbide Mini Turning Tool Set with Flush Fit Comfort Grip Hardwood Handles | Heavy Duty Steel Riveted Ferrules and 2 ea Round 2 ea Square and 2 ea Diamond Shaped Carbide Cutters

#ad
Savannah #ad - Easy wood turning on your lathe with savannah carbide turning tools. With the savannah carbide mini turning tool set you can eliminate the inconvenience of sharpening your turning tools and with the flat bottom bars on each tool you’ll be able to easily turn most any type of project! When the carbide cutter on the tool finally dulls, once needed, simply loosen the cutter screw, rotate the tip and secure the screw for a fresh, clean cutting edge.

Each mini turning tool has a flush fit comfort grip handle. We all know how "enjoyable" sharpening our turning tools can be. Square tool, 1 ea. Each turning tool steel bar is approx. 9-1/8" long and has a heavy duty steel ferrule for added strength and support. Diamond shaped tool, 2 ea.

The shearing action of this type of turning produces much cleaner cuts and is easier than using standard turning tools. Diamond shaped carbide cutters, 6 ea. However, the cutters are replaceable. We also know that if you don't have the tool at just the right angle when turning, the results can be undesirable. Unlike standard wood turning tools, when using carbide tipped cutters, you keep the cutter straight in on the object you are turning.
BrandSavannah #ad
ManufacturerSavannah Wood Turning Tools #ad
Part Number7651
Model7651

3. Savannah

#ad

Savannah, 7586 Carbide Turning Tool Large Size 3 Piece Set, All 3 Turning Tools Includes Diamond Shape, Three Tool Set, Round and Square Turning Tools With Comfort Grip Handles

#ad
Savannah #ad - To make turning even more enjoyable, the shaft of the savannah Carbide Turning Tool also features a flat back for stability while your turning. Handle length is approximately 13-1/2” from the end to the stainless steel ferrule. 6-9/16" from the tip of the cutter to the ferrule, the square tool measures appx.

It is ideal for wood turners of all skill levels and helps ensure success right from the start. Once the cutter head is completely used, simply replace it with a new carbide cutter. Set includes the large round # 7537, square # 7538 and diamond # 7539 cutter tools. The round tool measures appx. The solid carbide stays sharper for a longer period of time in comparison to steel tools. The savannah large Carbide Turning Tools are designed with ease of use in mind.

All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. The comfortable rubber grip helps reduce hand fatigue while turning. 6-5/8" from the tip of the cutter to the ferrule. The savannah carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head.
BrandSavannah #ad
ManufacturerPeachtree Woodworking Supply Inc. #ad
Part Number7586
Model7586

4. Savannah

#ad

3 piece Large Carbide Turning Tool Replacement Cutter Set. 1 each Square, Round and Diamond Shaped Cutters

#ad
Savannah #ad - This pack also includes 2 screws for securing the cutters to the tool. When the carbide cutter finally dulls, simply loosen the screw that holds the cutter in place, rotate the cutter to a sharp, clean edge and then secure the cutter by tightening the screw. Another advantage is that they are ready to go right out of the box! No more making sure your brand new tool is sharp enough to start turning.

The idea is that the razor sharp carbide shears the material to produce much cleaner cuts and tends to be easier to use than standard styles of turning tools. Carbide cutters will stay sharper for a longer period of time when compared to standard turning tools. Carbide cutters don’t so much cut your wood or material like standard turning tools. This cutter set comes with two screws that are sized for Savannah turning tools, you may need to use the screws that came with your turning tools to properly secure these cutters.

These three cutters have been designed to replace the 3 cutters that come with the savannah 3 piece large carbide turning tool set. We offer the cutters in a 3 pack that includes 1 each of the most commonly used profiles. The cutters will NOT fit on mini versions of carbide turning tools. Please note: the screws in this pack may or may not properly fit your turning tool. This means you must use the screws that came with your original turning tool.
BrandSavannah #ad
ManufacturerPeachtree Woodworking Supply Inc. #ad

5. Savannah

#ad

Savannah Carbide Tip Turning Tool Large Size Round Cutter

#ad
Savannah #ad - The comfortable rubber grip helps reduce hand fatigue while turning. All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools.

The savannah large Carbide Turning Tools are designed with ease of use in mind. Easy wood turning on your lathe with savannah carbide turning tools. Handle length is approximately 13-1/2” from the butt to the stainless steel ferrule. The savannah carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. 6-9/16" from the tip of the cutter to the ferrule. Once the cutter head is completely used, simply replace it with a new carbide cutter.

The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The round tool measures appx. To make turning even more enjoyable, the shaft of the savannah Carbide Turning Tool also features a flat back for stability while your turning.
BrandSavannah #ad
ManufacturerPeachtree Woodworking Supply Inc. #ad
Part Number7537
Model7537

6. Simple Woodturning Tools

#ad

Simple Woodturning Tools Carbide Lathe Turning Tool Set of 3 Full Size with 17" Foam Grip Handles, USA Made

#ad
Simple Woodturning Tools #ad - This set of carbide lathe tools is ideal for turners at any skill level. 17" long solid aluminum foam grip tool handles are color coded for easy tool identification.

American made set of 3 full size carbide Lathe Turning Tools with Color Coded Handles: Hollower, Detailer & Rougher. With carbide it's all turning and no sharpening so you can begin turning immediately. Each lathe tool features a carbide tip with multiple sharp edges that can be rotated several times. A torx star wrench is included. Each lathe tool is 1/2" square cnc machined by Harrison Specialties in Ramsey, Minnesota. These tools are designed to be kept flat on the tool rest and parallel with the floor. Overall tool & handle length is 26. 5".
BrandSimple Woodturning Tools #ad
ManufacturerHarrison Specialties LLC #ad
Weight6 Pounds

7. Asieg Tool

#ad

Mini Carbide Tipped Wood Lathe Turning tools Combo set Rougher Detailer Finisher with Wood Handle and Diamond Round Square Carbide Inserts,3pcs

#ad
Asieg Tool #ad - Handle:wood material,Ergonomics design makes it more comfortable while doing turning job. Package: set of 3, Plastic case packaging.

Easy to use: greatly simplified learning curving when turning, No complicated angles to learn and remember, For all skill levels woodworking enthusiast or DIY,Every tool is beautifully coated for durability. If you need carbide replacement tip insert, you can find it in our Amazon Store,Square11 ×11× 2. 0mm,round 12 × 2. 5mm-30°,diamond 10×28mm with radius Point and 10×32mm with Sharp Point. Indexable replacement carbide insert design: matched with carbide insert, indexable give you fresh edge for maximum cutter life.
BrandAsieg Tool #ad
ManufacturerAsieg Tool #ad
Height2.36 Inches
Length12.2 Inches
Width2.36 Inches

8. PSI Woodworking

#ad

PSI Woodworking LCHSS8 Wood Lathe 8pc HSS Chisel Set

#ad
PSI Woodworking #ad - Includes wooden case for storage and carrying. Set includes 8 chisels 3/16" parting tool 5/8" spear scraper 1" skew chisel 5/8" Skew Chisel 5/8" Round Nose Scraper 1/2" Bowl Gouge 3/4" Spindle Gouge 7/8" Roughing Gouge. Great for woodworkers woodturners and penturners of all skill levels. Ideal chisel kit for turning pens pepper mills spindles bowls and lots more woodturning projects of all sizes. Each chisel measures 16-1/4" in length with a 6-1/4" M2 High Speed Steel blade and a 10" hardwood turned handles.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height13.5 Inches
Length18 Inches
Width2 Inches
Part NumberLCHSS8
ModelLCHSS8
Warranty2 Years Under Normal Use

9. YUFUTOL

#ad

Round and Square Turning Tools With Comfort Grip Handles Perfect For Turning Pens or Small to Mid-Size Turning Project, YUFUTOL Carbide Woodturning Tool Mini Size 3 Piece Set Includes Diamond Shape

#ad
YUFUTOL #ad - Designed to be kept flat on the tool rest and level to the floor, the YUFUTOL Finisher/Rougher/Detailer will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening,for wood hobbyist or DIY or carpenter.

Combo set include: 3 pieces wood turning ToolsMini Finisher/Rougher/Detailer, Carbide Insert Cutters And Allen Key. Set includes 2pcs round 12mm carbide cutters, 2pcs Square 11mm carbide cutters and 2pcs Diamond with radius cutters. Easy to use:greatly simplified learning curving when turning, No complicated angles to learn and remember, For all skill levels woodworking enthusiast or DIY. Dimension:length of tool bar 4. 72"120mm ,length of wood handle:7. 87"(200mm),overall length 12. 6"320mm.
BrandYUFUTOL #ad
ManufacturerLA HARDWARE INC #ad
Weight0.01 Pounds
Part NumberZY-GHM-0902-2-214

10. YUFUTOL

#ad

Wood Turning tool set Carbide Tipped Lathe Finisher/Rougher/Detailer/Hollower Tool Set(4pcs Bar+1pcs Handle) With Round/Square/Diamond Carbide Insert and Screw and Wrench

#ad
YUFUTOL #ad - Indexable replacement carbide insert design:matched with carbide cutter Square14 × 14 × 2. 0mm,2pcs round 12 × 2. 5mm-30°,diamond 10×28mm with Radius Point. Designed to be kept flat on the tool rest and level to the floor, the YUFUTOL Finisher/Rougher/Detailer will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening,for wood hobbyist or DIY or carpenter.

Of course, you can also yourself make the handle by DIY. Dimension and material:tool bar 9. 25"235mm ,head 059"15mm, overall length 9.

84"250mm,diameter 0472"12mm;tool bar-cnc machined High carbon steel, increase the stability and shock resistance. Easy to use:greatly simplified learning curving when turning, No complicated angles to learn and remember, For all skill levels woodworking enthusiast or DIY. Replaceable handle:match black aluminum alloy handle(290mm*26mm).
BrandYUFUTOL #ad
ManufacturerLA HARDWARE INC #ad
Height0.59 Inches
Length4.72 Inches
Weight0.01 Pounds
Width2.56 Inches