Top 10 PSI Lathe Chuck – Power Lathe Accessories

As an Amazon Associate I earn from qualifying purchases.

1. PSI Woodworking

#ad

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

#ad
PSI Woodworking #ad - 5" diameter and weighs 4 lbs. Barracuda2 chuck body is 3. 1 step jaws: 3/32" to 1-3/8" & 11/16" to 2-3/8"; #2 round jaws: 7/8" to 1-1/2" &1-1/4" to 2"; #3 wide bowl jaws: 3-1/16" To 4-3/8"; pin jaws: 1" To 2-1/4".

Pre-threaded to 1" x 8tpi and includes 3/4" X 16TPI spindle adapter. This is a c-series chuck; compatible with all additional c-series jaws and accessories: 7-3/4" jumbo flat jaws cjawfj2, Pen Blank Drilling Jaws CJAWPEN, 5" Small Flat Jaws CJAWFJ1, Set of 2 Alligator Jaws LCALJAWS, 8-1/4" Super Finishing Jaws CJAWXL, and more!. Includes: 1 barracuda2 chuck body, 1 gear key, 4 self-centering jaw sets, 1 woodworm screw chuck, 1 Allen wrench, 8 screws, 1 spindle adapter, 1 storage case. With the variety of included jaws, pens, the CSC3000C will mount most turning projects onto your Lathe; including bowls, other small turning projects, spindles, and much more.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height5.25 Inches
Length10.2 Inches
Weight8.6 Pounds
Width5 Inches
Part NumberCSC3000C
ModelCSC3000C
Warranty2 Years Under Normal Use

2. PSI Woodworking

#ad

PSI Woodworking CUG3418CC Utility Grip 4-Jaw Lathe Chuck System

#ad
PSI Woodworking #ad - Includes screw chuck, allen wrench, and a set of tightening levers. Includes #1 step jaws 3/32" to 1-7/8" external & 11/32" to 3-3/8" internal; includes #2 round jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal. Chuck is pre-threaded to 1" x 8tpi and includes 3/4" x 16tpi headstock spindle adaptor; Chuck body weighs 4 lbs and is 4" in diameter. This "c-series" chuck is compatible with all "C-Series" jaws and accessories. Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height4 Inches
Length4 Inches
Weight4.95 Pounds
Width2 Inches
Part NumberCUG3418CC
ModelCUG3418CC
Warranty2 Years Under Normal Use

3. PSI Woodworking

#ad

PSI Woodworking CSC500K Barracuda Micro Key Lathe Chuck System

#ad
PSI Woodworking #ad - Holds dowell from 1/4-inch up to 1-1/2-inch outside diameter. Mounts to 3/4-inch-by-16 tpi & also adapts to 1-inch-by-8 tpi. Includes step jaws, round jaws, and pin jaws. Weighs only 1. 2 pounds with a 2-1/8-inch outside diameter. Holds workpiece from 5/8-to-2-inch inside hole diameter.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height3.1 Inches
Length13.3 Inches
Weight4.3 Pounds
Width7.3 Inches
Part NumberCSC500K
ModelCSC500K
Warranty2 year limited warranty

4. PSI Woodworking

#ad

PSI Woodworking LCM18X Wood Lathe 3-Jaw Micro Chuck

#ad
PSI Woodworking #ad - 20 lbs; includes 2 Tightening Levers. Inside hold from 3/4" to 2-1/2"; Outside hold up to 1-1/4". Self-centering 3-jaw micro chuck is ideal for holding small woodturning projects and drilling. Reversible step jaws can hold work-piece from the inside or outside. Pre-threaded to 1" x 8tpi and includes a 3/4" x 16tpi lathe headstock spindle adaptor. Diameter is 2-1/2" and weighs 1.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Part NumberLCM18X
ModelLCM18X
Warranty2 Years Under Normal Use

5. PSI Woodworking

#ad

PSI Woodworking Products CSCPENCHK Dedicated Pen Drilling Lathe Chuck

#ad
PSI Woodworking #ad - Chuck weighs 1. 2 lbs. And is 2. 5" in diameter. The jaws will secure blanks up to 1" across, and 4" long. The chuck is pre threaded to 1" x 8 tpi to match your spindle. Includes two tommy bars to tighten and loosen the jaws.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height3 Inches
Length4 Inches
Weight1.15 Pounds
Width3 Inches
Part NumberCSCPENCHK
ModelCSCPENCHK
Warranty2 Years Under Normal Use

6. PSI Woodworking

#ad

PSI Woodworking CSCBARR52 Barracuda Insta-Change Jaw Chuck System

#ad
PSI Woodworking #ad - Instantly change your chuck jaws; remove and replace all 4 jaws in less than a minute; jaws will snap into place for a secure mount; use the included jaw removal tool to pop them off the chuck body.

Barracuda chuck body: pre-threaded at 1" X 8TPI, weighs 4 lbs. Diameter 3. The included #2 round jaws have an exterior work piece grip range of 1-1/2" To 2-5/8" And an interior work piece grip range of 2" To 3-3/8". Instar-change jaw chuck system includes: barracuda chuck body, set of #2 round jaws, jaw tightening key, set of pen blank drilling jaws, jaw removal tool, woodworm screw chuck, storage case.55", enclosed back plate with indexing. For all of your woodturning projects from pens to peppermills to bowls, pin jaws cscbARP, the following jaw styles are available separately: #3 Wide Bowl Jaws CSCBARB, #1 Step Jaws CSCBARS, and Super Finishing Jaws CJAWXL52.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Part NumberCSCBARR52
ModelCSCBARR52
Warranty2 Years Under Normal Use

7. PSI Woodworking

#ad

PSI Woodworking CJAWPEN Pen Blank Drilling Jaws For "C" Series PSI Lathe Chucks

#ad
PSI Woodworking #ad - Will hold a large variety of blank sizes depending on which chuck you attach these jaws. Eliminates the need to purchase a separate new chuck for blank drilling. Converts your existing chuck fast and easy. Inexpensive and accurate.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height1.5 Inches
Length2 Inches
Weight0.5 Pounds
Width2.25 Inches
Part NumberCJAWPEN
ModelCJAWPEN
Warranty2 Years Under Normal Use

8. Penn State Industries

#ad

Penn State Industries CSC3500SE Wood Lathe Chuck Ultra Essentials Bundle

#ad
Penn State Industries #ad - Compatible with all additional c-series jaws and accessories: 7-3/4" jumbo flat jaws cjawfj2, 5" Small Flat Jaws CJAWFJ1, Set of 2 Alligator Jaws LCALJAWS, #3 round Jaws CJAW3, Pin Jaws CJAWPC, and more!.

Works with any mini, midi, high-performance, or full sized lathe. Chuck body is pre-threaded to 1" x 8tpi, weighs 4 lbs. And measures 3-1/2" diameter. Includes: barracuda2 chuck body, 16 jaw screws, 2" round jaws, Allen Wrench, Step Jaws, pen blank drilling Jaws, Screw Chuck, Jaw Tightening Key, and a Storage/Carrying Case. Get a powerful grip on your work with the easy to use, key operated self centering four-jaw Barracuda2 wood lathe chuck system. With the variety of included jaws, other small turning projects, pens, spindles, the CSC3500SE will mount most turning projects onto your lathe; including bowls, and much more.
BrandPenn State Industries #ad
ManufacturerPenn State Industries #ad
Part NumberCSC3500SE
ModelCSC3500SE

9. PSI Woodworking

#ad

PSI Woodworking TM42 Headstock Mount Lathe Drill Chuck

#ad
PSI Woodworking #ad - Mounts in a lathe without a Morse taper. Comes with a 1" x 8 tpi Headstock Mount. Includes a drill chuck key. Precision 1/2" three jaw drill chuck.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height1.55 Inches
Length4.75 Inches
Width1.55 Inches
Part NumberTM42
ModelTM42
Warranty2 Years Under Normal Use

10. PSI Woodworking

#ad

PSI Woodworking Products LCDOWEL Dowel Collet Chuck System

#ad
PSI Woodworking #ad - Easily hand tightens to safely secure collet and work piece. 5 included er32 collets: 1/4", 3/8", 1/2", 5/8", 3/4". Also includes Blow molded carrying case for easy storage.

Collet will 'snap' into position within the sleeve nut. Ideal for gripping pen mandrels, bottle stoppers, and other small woodturning projects where a Tenon is used for Chucking. Get precision gripping and centering of small diameter dowels, tenons, spindles. Collet chuck body pre-threaded to 1" x 8TPI, 1 3/4" X 16TPI Lathe headstock spindle adapter. After assembly, screw chuck on lathe spindle and tighten sleeve nut around work piece.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height3.3 Inches
Length10.5 Inches
Weight4.85 Pounds
Width7.9 Inches
Part NumberLCDOWEL
ModelLCDOWEL
Warrantytwo years