Top 10 Plug Cutter Set – Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. Rocaris

#ad

Rocaris 8pcs Wood Plug Cutter Drill Bit Set Straight and Tapered Taper 5/8" 1/2" 3/8" 1/4" Cutting Tool Cork Drill Bit Knife

#ad
Rocaris #ad - Chamfered cutters Make Tapered plugs To Fill Countersunk Holes. Use standard cutters To Eliminate Imperfections In Wood. The cutter set Achieves excellent finish when using same timber. 8 piece plug cutter set Makes perfect plugs for counter-bored holes. This set includes 4 standard plug cutters and 4 four-tooth chamfered cutters.
BrandRocaris #ad
ManufacturerDrill Warehouse #ad
Part Number43237-2

2. Make it Snappy

#ad

Make it Snappy Tools 3 Piece Tapered Plug Cutter Set

#ad
Make it Snappy #ad - Use with your Snappy quick change chuck in your drill press. Match wood grain to conceal screws. Made in usA by Snappy. Sharp clean cutting too is hardened for long life. Set of 3 includes; 1 each - 1/4", 3/8", and 1/2" plug cutters.
BrandMake it Snappy #ad
ManufacturerMake it Snappy Tools, Inc. #ad
Height0.85 Inches
Length6.3 Inches
Width5.55 Inches
Part Number43300
Model43300

3. Grizzly

#ad

Grizzly Industrial H7693, Deep Plug Cutter 6 pc. Set

#ad
Grizzly #ad - Diameter sizes include 3/8-inch, 1/20-inch, 5/8-Inch, 3/4-Inch 7/8-Inch and 1-Inch. Cut plugs and long tenons up to 2-1/8" with this 6-pc. Each cutter is protected in a fitted wooden case. Shank size is 1/2". Each cutter is protected in a fitted wooden case. Deep plug cutter set. Deep plug cutter set. Diameter sizes include 3/8", 5/8", 1/2", 3/4" 7/8" and 1". Cut plugs and long tenons up to 2-1/8-Inch with this 6-pc. Shank size is 1/2-Inch.
BrandGrizzly #ad
ManufacturerGrizzly Industrial #ad
Height2.4 Inches
Length6.1 Inches
Width7.9 Inches
Part NumberH7693
ModelH7693

4. Rocaris

#ad

Rocaris 23-Pack Woodworking Chamfer Drilling Tool, 7pcs Three Pointed Countersink Drill Bit with L-wrench, and Automatic, 8PCS Wood Plug cutter, 6pcs 1/4" Hex 5 Flute 90 Degree Countersink Drill Bits

#ad
Rocaris #ad - 7pcs three pointed countersink drill bits made of high speed steel with good abrasion resistance and durable, 10mm for drilling pilot holes, 6mm, 8mm, includes 3mm, 7mm, 5mm, 4mm, the drill bit large chip flute and five edge chamfers allows faster and easier discharge of sawdust.

Package included 23pcs woodworking chamfer drilling tool, 7pcs three pointed high speed steel countersink drill Bit with One L-wrench for Wood Drilling or Woodworking Chamfer, 8pcs wood plug cutters drill bit set and 1pcs Automatic center punch for marks workpiece with a dimple, 6pcs 1/4" Hex Shank HSS 5 Flute 90 Degree Countersink Drill Bits, creating a starting point that prevents screws and drills from wandering.33/8" shank 8pcs wood plug cutter drill bit set made of durable carbon steel material, 3/8", 1/2", 5/8" wood plugs to cover recessed screw holes or hide blemishes, used for tapered 1/4", able to cut plugs to 22mm/23mm/25mm/26mm in length.1

1/4" hex shank 5 flute countersink drill bit made of high speed steels and with 6 different diameter sizes 6mm1/4", 19mm3/4", 12mm1/2", 9mm3/8", 16mm5/8", 8mm5/16", used for sinking 90 Degree 6 different sizes Holes into Wood and PVC boards Countersunk Screws and Fixings.
BrandRocaris #ad
ManufacturerRocaris #ad

5. Riyiter

#ad

Riyiter 8pcs Carbon Steel Wood Plug Cutter Cutting Tool Drill Bit Set Straight and Tapered Taper 5/8" 1/2" 3/8" 1/4" Cutting Tool Cork Drill Bit Knife

#ad
Riyiter #ad - Material : high-carbon steel 45#. Total length : 50mm;shank length : 20mm;Round Shank Diameter : 10mm. Note: suitable for bench drill, bench drill speed should not be too fast, too fast speed will smoke and charred. Etc. Size : 6mm 1/4", 10mm 3/8", 13mm 1/2", 16 5/8". This set includes 4 standard plug cutters and 4 four-tooth chamfered cutters.
BrandRiyiter #ad
ManufacturerRiyiter #ad
Height0.5 Inches
Length4.2 Inches
Weight0.47 Pounds
Width2.5 Inches
Part Numberryt014_a1

6. Rocaris

#ad

8Pcs Core Drill Bit Set & 8 Replacement Drill Bit, 7Pcs Countersink Drill Bit, 6Pcs Countersink Drill Bits, 8Pcs Wood Plug cutter, 1Pcs Center Punch, Rocaris 40 Pack Woodworking Chamfer Drilling Tool

#ad
Rocaris #ad - Package included 40 pack woodworking chamfer drilling tool, 8pcs wood plug cutters drill bit set, 1pcs automatic center punch, 6pcs 1/4" 90 Degree Countersink Drill Bits, 7pcs three pointed high speed Steel Countersink Drill Bit with One L-wrench, and 8pcs Self Centering Hinge Tapper Core Drill Bit Set & 8 Replacement Drill Bits 5/64” - 1/4".

Hinge drills come in 8 different sizes: 5/64', 13/64'', 2 of 9/64'', 11/64'', 7/64'', 5mm and 1/4".3/8" shank 8pcs wood plug cutter drill bit set made of durable carbon steel material, used for tapered 1/4", 5/8" wood plugs to cover recessed screw holes or hide blemishes, 1/2", 3/8", able to cut plugs to 22mm/23mm/25mm/26mm in length.77pcs three pointed countersink drill bits made of high speed steel with good abrasion resistance and durable, includes 3mm, 10mm for drilling pilot holes, 8mm, 6mm, 7mm, 5mm, 4mm, the drill bit large chip flute and five edge chamfers allows faster and easier discharge of sawdust.1

1/4" hex shank 5 flute countersink drill bit made of high speed steels and with 6 different diameter sizes 6mm1/4", 9mm3/8", 16mm5/8", 12mm1/2", 8mm5/16", 19mm3/4", used for sinking 90 Degree 6 different sizes Holes into Wood and PVC boards Countersunk Screws and Fixings. With 1 hex key and 8 replacement drill bits.
BrandRocaris #ad
ManufacturerRocaris #ad

7. General Tools

#ad

1/2-Inch & 5/8-Inch Diameter Bits, General Tools S31 Plug Cutter 3-Piece Set with 3/8-Inch

#ad
General Tools #ad - Shank- all three plug cutters feature a 3/8” shank. Decorative- permits choice of matching or contrasting plugs for decorative effect. Durable- made from hardened alloy steel, these Plug Cutters will cut a plug from any wood stock, from pine to oak. Accurate- cutter will produce and eject straight plugs from stock up to 3/4" thickness for covering screw holes in decking, flooring and other woodworking projects. Versatile- engineered to start cutting plugs easily, and eject it, using either a hand-held drill or drill press.
BrandGeneral Tools #ad
ManufacturerGeneral Tools #ad
Height1 Inches
Length7.25 Inches
Weight0.24 Pounds
Width3.25 Inches
Part NumberS31
ModelS31

8. WFLNHB

#ad

8Pcs Wood Plug Cutter Carbon Steel Straight and Taper Claw Drill Bit Set Fit for Woodworking Hole Saw Cutting 5/8" 1/2" 3/8" 1/4"

#ad
WFLNHB #ad - Note: suitable for bench drill, bench drill speed should not be too fast, too fast speed will smoke and charred. Etc. Advantage:chamfered cutters make tapered plugs to fill countersunk holes, easy to operate. Material:carbon steel, titanium-coated, sharp, solid and durable for long life. Description:deep plug cutter set, 1/2", shank diameter: 9. 3mm; diameter sizes: 1/4", 3/8", 5/8". Include: 4 standard plug cutters and 4 four-tooth chamfered cutters.
BrandWFLNHB #ad
ManufacturerWFLNHB #ad
Part NumberDoes Not Apply

9. LAMPTOP

#ad

3 Step Drill Bit, 7 Three Pointed Countersink Drill Bit with L-wrench, LAMPTOP 26-Pack Woodworking Chamfer Drilling Tools including 6 Countersink Drill Bits, and Automatic, 8 Wood Plug cutter

#ad
LAMPTOP #ad - Not suitable for hard and brittle materials such as stainless steel, tile floors, PVC sheet, Aluminum Plate; within 5mm/0.2 inch wood, perfect step drill Bits suitable for drill holes in various material: within 3mm/012 inch iron plate, glass, Copper Plate, walls etc.6pcs 1/4" hex 5 flute 90 degree countersink drill bits: all have a 90° angle on the point for sharp and precise countersinking.

3/8" shank 8pcs wood plug cutter drill bit set made of durable carbon steel material, 3/8", 1/2", used for tapered 1/4", 5/8" wood plugs to cover recessed screw holes or hide blemishes, able to cut plugs to 22mm/23mm/25mm/26mm in length. 7pcs three pointed countersink drill bit with l-wrench are made of high speed steel with good abrasion resistance and durable, 4mm, 8mm, includes 3mm, 10mm for drilling pilot holes, 7mm, 6mm, 5mm, the drill bit large chip flute and five edge chamfers allows faster and easier discharge of sawdust.1

1/4" hex shank 3pcs hss step drill bit set, insulation boards. A chatter-free, five-flute designed with staggered cutting teeth aranged to insure free chip flow and rapid chatter free cutting. Click “buy it now” and enjoy quality of OUR TOOLS. Refund or resend guarantee--no questions asked! if you are not 100% satisfied with your wood working chamfer drilling Tool, a refund or a new package will be issued. The cutting edge is hardened and honed for sharpness.
BrandLAMPTOP #ad
ManufacturerLAMPTOP #ad

10. Make it Snappy

#ad

3/4", Snappy Tools Plug Cutter

#ad
Make it Snappy #ad - 3/4" hex drive plug cutter. Tight fit; no glue needed. Tapered sides and a chamfered end for easy start. Hardened steel for long life. Plug cutters fit in quick change chuck in a drill press.
BrandMake it Snappy #ad
ManufacturerMake it Snappy #ad
Height1.15 Inches
Length2.05 Inches
Weight0.25 Pounds
Width4.65 Inches
Part Number40348
Model40348