Top 10 Mandrel Saver MT1 – Lathe Turning Tools

As an Amazon Associate I earn from qualifying purchases.

1. Taytools

#ad

Taytools 467351 Pen Turning Lathe Mandrel Saver Morse Taper MT1 Liver Center

#ad
Taytools #ad - Will work with almost any mandrel with a shaft diameter of. 245 inches of or smaller. Mandrels can easily deflect or bend when the tailstock center point is appropriately tightened into the indentation in the end of the mandrel.

This mandrel saver is a must-have accessory for pen turners. This mandrel saver allows the mandrel shaft to extend into or through the hollow end and provides support without putting pressure on the end of the mandrel. Tailstock mount is #1 MT Morse Taper. Tightening up the tube and bushing assembly is done by turning your tailstock quill adjustment wheel. The pen bushings press against the live center with little to no pressure on the mandrel shaft. This mandrel saver eliminates damage to mandrels and out of round pen blanks.
BrandTaytools #ad
ManufacturerTaylor Toolworks #ad
Part Number467351

2. Taytools

#ad

Taytools 465517 Pen Turning Lathe Mandrel Morse Taper MT1 Quick Adjust, Handles Blanks Up to 5 Inches, Overall Length 9 Inches

#ad
Taytools #ad - Mandrel is. 245" in diameter and will handle blanks up to 5” in length. Overall length is 9”. Features a true fitting #1 Morse Taper, which promotes a secure fit to the headstock of the lathe. Inset your blank and tighten the brass knurled nut on the threaded end with finger pressure. The big advantage of this pen mandrel is its ability to easily adjust to different blank sizes. The threaded end works with a live center. Simple slide the brass compression fitting where you want it and tighten.
BrandTaytools #ad
ManufacturerTaylor Toolworks #ad
Part Number465517

3. Haudang

#ad

Haudang Pen Turning Lathe Live Mandrel Saver for Woodworking Morse Taper MT1 Liver Center

#ad
Haudang #ad - Used in tailstocks to secure pen blanks on the mandrel. There is no longer a need for spacer bushings. Provides no pressure on the mandrel thus eliminating any bending and vibration. Eliminates damaged mandrels and out-of-round pen blanks by putting pressure directly on the pen bushing, not the mandrel. Adapts to almost every mandrel with a shaft diameter of. 245 inch 6. 22mm or smaller; mostly commonly used with 7mm mandrels.
BrandHaudang #ad
ManufacturerHaudang #ad
Part Number329873A1

4. Adanse

#ad

Adanse Pen Turning Lathe Live Mandrel Saver for Woodworking Morse Taper MT1 Liver Center

#ad
Adanse #ad - There is no longer a need for spacer bushings. Eliminates damaged mandrels and out-of-round pen blanks by putting pressure directly on the pen bushing, not the mandrel. Adapts to almost every mandrel with a shaft diameter of. 245 inch 6. 22mm or smaller; mostly commonly used with 7mm mandrels. Provides no pressure on the mandrel thus eliminating any bending and vibration. Used in tailstocks to secure pen blanks on the mandrel.
BrandAdanse #ad
ManufacturerAdanse #ad
Height1.97 Inches
Length4.33 Inches
Weight0.12 Pounds
Width1.97 Inches
Part Number29873A1

5. Fauge

#ad

Fauge Pen Turning Lathe Live Mandrel Saver for Woodworking Morse Taper MT1 Liver Center

#ad
Fauge #ad - Provides no pressure on the mandrel thus eliminating any bending and vibration. Adapts to almost every mandrel with a shaft diameter of. 245 inch 6. 22mm or smaller; mostly commonly used with 7mm mandrels. There is no longer a need for spacer bushings. Eliminates damaged mandrels and out-of-round pen blanks by putting pressure directly on the pen bushing, not the mandrel. Used in tailstocks to secure pen blanks on the mandrel.
BrandFauge #ad
ManufacturerFauge #ad
Part Number329873A1

6. Pite

#ad

Pite Pen Turning Lathe Live Mandrel Saver for Woodworking Morse Taper MT1 Liver Center

#ad
Pite #ad - There is no longer a need for spacer bushings. Adapts to almost every mandrel with a shaft diameter of. 245 inch 6. 22mm or smaller; mostly commonly used with 7mm mandrels. Provides no pressure on the mandrel thus eliminating any bending and vibration. Used in tailstocks to secure pen blanks on the mandrel. Eliminates damaged mandrels and out-of-round pen blanks by putting pressure directly on the pen bushing, not the mandrel.
BrandPite #ad
ManufacturerPite #ad
Height1.97 Inches
Length4.33 Inches
Weight0.12 Pounds
Width1.97 Inches
Part Number329873A1

7. PSI Woodworking

#ad

1 Morse Taper 1MT, PSI Woodworking PKMS1SET Pen Mandrel Saver Package

#ad
PSI Woodworking #ad - No need for the knurled nut that sometimes gets lost, misplaced, or stripped. Perfect system to avoid bent mandrel shafts and ruining the point on your live center. System adapts to the length of your project. Includes 7mm drill bit, 5 7mm bushings, #1MT mandrel saver tailstock center, & #1MT basic mandrel. Great for turners of all skill levels.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking Products #ad
Height1.5 Inches
Length12.2 Inches
Weight0.65 Pounds
Width1.5 Inches
Part NumberPKMS1SET
ModelPKMS1SET
Warranty2 years under normal use

8. PSI Woodworking

#ad

PSI Woodworking PKM-BL Screw-On Pen Mandrel 1" x 8tpi

#ad
PSI Woodworking #ad - 7mm mandrel shaft. 244" od. Screw-on pen mandrel pre-threaded to 1" x 8TPI. Replacement shafts XPKM-ELC2. Also includes 7 7mm bushings, 1 knurled nut, 1 7mm Brad point drill bit. Compatible with psi Woodworking mandrel savers Pkmsts1 & Pkmsts2.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking Products #ad
Height1.7 Inches
Length10.2 Inches
Weight0.64 Pounds
Width1.7 Inches
Part NumberPKM-BL
ModelPKM-BL
Warranty2 years under normal use

9. PSI Woodworking

#ad

PSI Woodworking PKMSTS2 Live Tailstock Mandrel Saver #2 Morse Taper

#ad
PSI Woodworking #ad - 245" or less. Provides no pressure on the tailstock end of the mandrel shaft thus eliminating any bending or vibration. Will work with all mandrels with a diameter of 0 There is no longer a need for spacer bushings. Compatible with lathes that accept #2MT accessories in tailstock. Unique design to support the end of your penturning mandrel.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height1.7 Inches
Length3.8 Inches
Weight0.4 Pounds
Width1.8 Inches
Part NumberPKMSTS2
ModelPKMSTS2
Warranty2 Years Under Normal Use

10. Hurricane Turning Tools

#ad

Lathe Pen Mandrel Saver, Hurricane Turning Tools, 2MT

#ad
Hurricane Turning Tools #ad - Material: Steel. Eliminates damaged mandrels and out-of-round pen blanks by putting pressure directly on the pen bushing, not the mandrel. Tailstock mount: #2 MT Morse Taper. Used in tailstocks to secure pen blanks on the mandrel. Adapts to almost every mandrel with a shaft diameter of. 245" 6. 22mm or smaller; mostly commonly used with 7mm mandrels.
BrandHurricane Turning Tools #ad
ManufacturerHurricane Turning Tools #ad
Height2 Inches
Length4 Inches
Width2 Inches
Part NumberHTT-ACC-PMS-2MT