Top 10 Kobalt Miter Saw – Home Improvement

As an Amazon Associate I earn from qualifying purchases.

1. KBLT

#ad

Kobalt Compact Sliding 7-1/4-in 10-Amp Single Bevel Sliding Laser Compound Miter Saw

#ad
KBLT #ad - Bevel cutting up to 47 degrees to the left, positive stops at 0 and 45 degrees. Tool-less adjustable upfront mounted laser guide system projects accurate pre-cutting line for precise alignment.

Dual slide rail system with linear bearings allows for smooth and accurate operation. Maximum crosscut up to 2 in x 8 in nominal at 90 degrees and 2 in x 6 in at 45, idea for molding and framing cuts. Miter cuts up to 50 degrees left and right with 9 positive stops at the most used degrees. Large, delivers up to 5, die-cast aluminum base and table for increased work support. Lightweight under 23 lbs for easy transport from storage to work location. Tall, die-cast aluminum fence gives support during setup and cutting. Powerful 100 amp ball bearing motor, 000 rpM for accurate cuts.
BrandKBLT #ad
ManufacturerKBLT Tools #ad
Height18.5 Inches
Length23.5 Inches
Width22 Inches
Part NumberSM1816LW

2. DEWALT

#ad

DEWALT Sliding Compound Miter Saw, 12-Inch DWS779

#ad
DEWALT #ad - Maximum cutting Thickness:6. 75 inch. Backed by dewalt'S 3 year limited warranty. Exclusive back fence design cuts up to 2x16 dimensional lumber at 90 degree and 2x12 at 45 degree. Super efficient dust collection system captures over 75 percent of dust generated. Powerful 15 amp, 3, 800 RPM motor delivers extended power and durability.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height18.5 Inches
Length2 Inches
Weight56 Pounds
Width23 Inches
Part NumberDWS779
ModelDWS779
Warranty3 year limited warranty

3. DEWALT

#ad

DEWALT 12-Inch Miter Saw, Compound DWS715, Single Bevel, 15-Amp

#ad
DEWALT #ad - Miter dentent override that allows you to override the Miter Stops and Adjust to the Desired Setting Without the Saw Slipping into the Miter Detents. Miter detent plate improves productivity and Ensures Cutting Accuracy: Adjustable Stainless Steel Miter Detent Plate with 14 Positive Stops.

Power and durability: 15 Amp, 4, 000 Rpm Motor. Bevels to the left up to 48° and to the right up to 3°, 33. 9°, 45° and 33. 9° for cutting crown molding laying flat with 4 hardened steel bevel stops at 0°, with positive stops at 0°, 45° and 48° that delivers versatility at most common bevel angles. Tall sliding fences that support crown molding up to 5 1/4 inch nested and base molding up to 6 1/2 Inch vertically against the fence while easily sliding out of the way for bevel cuts.

Machined base fence support maintains fence perpendicularity with blade for cutting accuracy. Arbor size Is 5/8 Inches. Includes a carbide blade, dust bag, blade wrench, vertical clamp and comfortable side handles in the base. Cross cut capacity up to 2x8 inch dimensional Lumber at 90° and a 2x6 Inch Dimensional Lumber at 45°.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height18.9 Inches
Length26.77 Inches
Weight42.77 Pounds
Width21.85 Inches
Part NumberDWS715
ModelDWS715

4. TACKLIFE

#ad

Extended Table Lever, TACKLIFE Sliding Compound Miter Saw 12.5-AMP, Single-Bevel0°-45° with Laser Guide, Lightweight Aluminum Guard, PMS01X, Dust Bag, 4500RPM, 8-1/4 Inch

#ad
TACKLIFE #ad - Cam-lock with miter detent override. Maximum cutting performance - allows for square cuts, maximum cutting capacity: 0° x 0° - 60 x 300mm / 45° x 0° - 35 x 300mm / 0° x 45° - 60 x 210mm / 45° x 45° - 35 x 210mm, bevel cuts and compound cuts, which can adapt to cutting work in a variety of occasions.

Dust extraction & ergonomic design - efficient dust collection system captures large amount of dust. The stroke length is up to 7. 87 inches200mm, providing more possibility for your cutting. Package contents- tacklife pms01x miter saw, user manual, dust bag, 24 Tooth TCT blade, 24 Months Warranty, allen wrenches, Warranty Card, Carbon brush, extension rods, Clamping device, Email: [email protected] Net. With 22 lbs weight only, to facilitate maneuverability and easier transport.

24t tct blade & smaller capacity - ultra high grade 24 tooth tungsten carbide tipped blade allows to cut wood, soft metal, plastics, and etc with ease. Efficient and powerful motor - the 12. 5amp, 4500 rpm motor and 8-1/4'' 210mm blade deliver great power, durability and professional cutting performance. Extensible table for better material support with vice clamping system to secure work piece. The locking device can secure the machine head at a lower position, convenient to carry, safer to work.
BrandTACKLIFE #ad
ManufacturerTACKLIFE #ad
Height13 Inches
Length28.3 Inches
Weight22 Pounds
Width16.7 Inches
Part NumberPMS01X
ModelPMS01X

5. Metabo HPT

#ad

Large Table, 10-Inch, Metabo HPT Compound Miter Saw, 15-Amp Motor, 0-45° Bevel Range, 0-52° Miter Angle Range, 10" 24T TCT Miter Saw Blade C10FCGS, Single Bevel

#ad
Metabo HPT #ad - 15 amp motor delivers high power for the toughest of cuts. Miter angle range: 0°-52°, to the right and left for increased flexibility. 10" compound Miter Saw. Carbon brush access allows user to replace brush as needed to greatly prolong the life of the tool. Thumb actuated positive stops for quick miter adjustments. Hitachi power tools has renamed to Metabo HPT. Large table for better material support with vice clamping system to secure work piece. Bevel range: 0°-45˚, to the left with adjustable bevel stops for precision cuts. Same tools. New name.
BrandMetabo HPT #ad
ManufacturerMetabo HPT #ad
Weight24.5 Pounds
Part NumberC10FCGSM
ModelC10FCGS

6. TACKLIFE

#ad

40T 305mm Blade for Wood Cut, PMS03A, Double-Bevel Cut -45°-0°-45° with Laser Guide, Dust Bag, 3800rpm, TACKLIFE Sliding Compound Miter Saw 12-Inch, 15-Amp, Extensible Table

#ad
TACKLIFE #ad - Cutting capacity: 90°x90°-105x335mm/90°x45°-105x235mm/90°x45°l-60x335mm/90°x45°r-35x335mm/45°x45°L-60x235mm/45°x45°R-35x235mm. Included in delivery - tacklife pms03a miter saw, dust bag, 2 extension rods, 1 Set Carbon Brush, 40 tooth TCT Blade, allen wrenches, User Manual, 1 Set Clamping System, 24 Months Card.

35mm dust port allows you to connect your vacuum cleaner for ideal 100% dust collection to maintain a clean environment. Email: [email protected] Com. Integrated laser controlled by single switch, marking the cutting line, supporting for sawing long work pieces. Large working table for better material support, plastic tube, vice clamping system to secure work piece for safer cutting operation. 40 t blade & extensible table - 305mm 40tooth tct blade for smoother wood, soft metal cuts.

Double bevel cutting - double bevel cutting design allows you to adjust the head to left 45°and right 45°to meet different requirements of cutting job. Powerful motor & laser guide - 15 amp motor delivers 3800rpm per minute for efficient cuts and extended durability. Comes with allen wrenches for easy blade change. Sliding cutting design for added cutting width. Efficient dust collection system - efficient dust collection bag captures over 70% of dust generated.
BrandTACKLIFE #ad
ManufacturerTACKLIFE #ad
Height17.3 Inches
Length28.9 Inches
Width13.7 Inches
ModelPMS03A

7. Evolution Power Tools

#ad

Evolution Power Tools R185SMS+ 7-1/4" Multi-Material Compound Sliding Miter Saw Plus

#ad
Evolution Power Tools #ad - Manufacturers 3 year limited warranty. Includes laser guidance, 10 ft power cord, integrated carry handles, 3 piece Clamp, and dust bag. Without changing blades, This saw is designed to cut a wide range of materials. Powerful 10 amp hi-torque motor with optimized gearbox & blade system. 8- 1/4in x 2- 1/2in max cross cut capacity with a 0° - 45° bevel tilt and a 50˚ - 50˚ miter that covers all common cutting angles accurately.
BrandEvolution Power Tools #ad
ManufacturerEvolution Power Tools #ad
Part Number047-0004
ModelR185SMS+
Warranty3 Year Limited Warranty

8. BOSCH

#ad

15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw with 60 Tooth Saw Blade, Bosch Power Tools GCM12SD

#ad
BOSCH #ad - Capacity: expanded cutting capacity 14 inch horizontal capacity Nominal 6 1/2 inch Vertical capacity against the fence base 6 1/2 inch Crown capacity against the fence 45 spring. Ease of use: upfront bevel controls all metal bevel lock lever and range selector located Upfront for quick and easy bevel settings without reaching behind the saw.

Axial glide system: the patented glide system allows wider cross cuts and better alignment while also being compact; This saves you 12 inch of valuable work space; Bosch glide miter saw also offers unmatched smoothness of cut. Precision: square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support.

Adjustable: the gcm12sd miter saw provides easy adjustments with a large easy to read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33. 9 degree, 45 degree left/right for accurate cuts; Category best 90 percentage dust collection optimized for cutting 2x material with a vacuum.
BrandBOSCH #ad
ManufacturerBosch #ad
Height0 Inches
Length0 Inches
Weight65 Pounds
Width0 Inches
Part NumberGCM12SD
ModelGCM12SD
Warranty30-Day money back guarantee- 1 year warranty

9. CRAFTSMAN

#ad

CRAFTSMAN V20 7-1/4-Inch Sliding Miter Saw Kit CMCS714M1

#ad
CRAFTSMAN #ad - Nested crown and 3-1/2 in. V20 20v max* miter saw has a powerful 3, hardwoods, 800 RPM motor for cutting 2x dimensional lumber, baseboard and trim with ease. Cross cut at 45 degrees. Baseboard vertically. Lightweight design at 21. 8 lbs. Slide capacity allows for 8 in. Cross cut at 90 degrees and 5. 5 in. With side carry handles make this unit extremely portable. 7-1/4in. Part of the V20 cordless system. 3 year limited warranty, refer to "Warranty & Support" section below for full details. Capacity to cut 3-5/8 in.
BrandCRAFTSMAN #ad
ManufacturerCRAFTSMAN #ad
Part NumberCMCS714M1
ModelCMCS714M1

10. TACKLIFE

#ad

EMS01A, Double Speed 4500 RPM & 3200 RPM, Bevel Cut 0°-45° with Laser, Chip Bag, Miter Saw, TACKLIFE 15 Amp 10-Inch Sliding Compound Miter Saw with 3 Blades, Extension Table, Iron Blade Guard

#ad
TACKLIFE #ad - 2 speeds & durable tool- with the single press of the switch, high speed for wood while low speed for metal. Clean environment & extension table- additional chip bag connects directly to the saw, and helps collect sawdust away from the workpiece. Sliding cutting design allows for cutting longer boards.

Bevel cutting & laser guide- a free bevel range from 0°to 45° allows you to make beveled cuts for more versatile uses. Built from stainless steel castings, you can convert between two speeds3200 RPM or 4500 RPM with ease for more precise cutting, it provides you with a solid saw that is able to withstand the daily rigors in job site. Comes with a laser that accurately tracks the real-time position and allows you to make precise adjustments. 3 blades & iron blade guard- richer accessories provide a wide range of choice, and one multifunctional 10" 48T TCT blade for versatile use.

35mm dust port can also be connected to your vacuum cleaner instead of the chip bag to capture more of the dust. Package contents- tacklife advanced 10-inch 15-amp miter saw, 1*10" multi-function blade, 2*10" blades for wood, 1* clamping device, 1* dust bag, 2*hexagonal wrench, 1*user manual, 1*24 months warranty card. Solid iron self-retracting saw shield covers the teeth of the cutting blade, two 10" 40T TCT blades for wood and plastic, helps protect you from accidental mishaps. Extension table with vice clamping provides better support and balance, adding stability when cutting.
BrandTACKLIFE #ad
ManufacturerTACKLIFE #ad
Height17.7 Inches
Length30.7 Inches
Width22.8 Inches
Part NumberEMS01A