Top 10 Hardened Steel Punch Set – Metalworking Chisels

As an Amazon Associate I earn from qualifying purchases.

1. Astro Pneumatic Tool

#ad

Astro Pneumatic Tool 1600 16-Piece Punch and Chisel Set

#ad
Astro Pneumatic Tool #ad - Cold chisels: 3/8-inch by 5-1/2-inch, 1/2-inch by 6-inch, 5/8-inch by 6-1/2-inch. Taper punch: 3/32-inchby5-1/4-inch, 3/16-inchby6-1/4-inch, 5/32-inchby6-inch, 1/8-inchby5-3/4-inch, 1/4-inchby6-3/4-inch. Pin punch: 3/32-inch by 4-1/4-inch, 1/8-inch by 4-3/4-inch, 5/32-inch by 5-inch, 3/16-inch by 5-1/4-inch, 1/4-inch by 5-3/4-inch. Center punch: 1/8-inch by 5-inch, 3/16-inch by 6-inch. Product material: cr-V and hardness: 54~58HRC.
BrandAstro Pneumatic Tool #ad
ManufacturerAstro Pneumatic #ad
Height1.1 Inches
Length9 Inches
Weight1 Pounds
Width9.7 Inches
Part NumberAPT-1600
ModelAST1600

2. Starrett

#ad

1/16", 5/32", 1/8", Starrett Drive Pin Punch Set, S565WB, 1/4", 7/32", 3/32", 3/16", 5/16" Diameters and 4 Inch Length, Made of Hardened Steel Metal, Comes in Plastic Storage Case, 8 Pieces

#ad
Starrett #ad - Storage case included: this center pouch set comes with a convenient, red plastic storage case for keeping your pin punches organized Each punch has its size stamped on the head. Pin punch uses: pin punches are tools used to insert or knock out rivets and pins in assemblies They have a metal shank on one end and a metal pin driver on the other and are typically tapped with a hammer.

Set of 8: the starrett s565wb bulk set includes eight drive pin punches with a 4" overall length and 1/16", 1/8", 3/16", 7/32", 5/32", 3/32", 1/4", and 5/16" pin diameter sizes.

Its tempered head makes it less likely to fracture from a hard, off-center blow. Knurled grips: round shank is knurled for a sturdy grip and greater control As an added precaution, always wear safety goggles when using striking tools. Steel construction: these pin punches are made of hardened steel for wear resistance and strength.
BrandStarrett #ad
ManufacturerStarrett #ad
Height2.5 Inches
Length4.5 Inches
Weight0.3 Pounds
Width2.5 Inches
Part NumberS565WB
ModelS565WB
Warranty1 year

3. Starrett

#ad

Starrett 18C Automatic Center Punch with Heavy Duty Hardened Steel Metal, Carpenters with Adjustable Knurled Cap to Control Blow Force, Universal Tool for Machinists, 5.14" x 11/16"

#ad
Starrett #ad - Steel construction: this center punch is made of hardened steel and has a knurled finger grip for ease of handling and greater punching control Its tempered head makes it less likely to fracture from a hard, off-center blow.

Pre-drilling tool: the c18 automatic heavy duty center Punch is a tool with a conical point, which is used making an indentation in an object This allows you to safely drill a hole at the same spot without slipping. No hammer needed: this punch has a mechanism that automatically strikes a blow when downward pressure is applied No hammer is required, making one hand always free to steady the work.

Removable point: the point can be easily removed for sharpening or replacement Always wear safety goggles when using striking tools. Adjustable force: for a heavy mark, the cap is screwed down. Progressively lighter marks are obtained by turning the cap upward Marks made by the point are uniform in depth and size for each setting.
BrandStarrett #ad
ManufacturerSTAKF #ad
Height0.4 Inches
Length5.4 Inches
Width1.1 Inches
Part Number18C
Model18C

4. Starrett

#ad

Starrett S565WBS Steel & Brass Drive Pin Punch Set

#ad
Starrett #ad - Knurled grip for secure holding. Round red plastic box. Punch diameter clearly marked on the head. Hardened and tempered steel. High quality brass.
BrandStarrett #ad
ManufacturerStarrett Precision Measurement #ad
Part NumberS565WBS
ModelS565WBS

5. Starrett

#ad

Set of 8, 3/16", Starrett Drive Pin Punch Set, 1/4", 7/32", Made of Hardened, 5/32", 1/8", S565WB, 1/16", Tempered Steel Metal with Hurled Finger Grip, 5/16" Diameters and 4 Inch Length, 3/32"

#ad
Starrett #ad - Pin punch uses: pin punches are tools used to insert or knock out rivets and pins in assemblies; They have a metal shank on one end and a metal pin driver on the other and are typically tapped with a hammer. Steel construction: these pin punches are made of hardened steel for wear resistance and strength; Its tempered head makes it less likely to fracture from a hard, off-center blow.

Set of 5: the starrett s248 bulk set includes five drive pin punches with an extra long length of 8" and 1/8", 1/4", 3/16", and 5/16" pin diameter sizes. Well proportioned, hardened and properly tempered. Storage case included: this center pouch set comes with a convenient, red cardboard storage box for keeping your pin punches organized; Each punch has its size stamped on the head.

Knurled grips: round shank is knurled for a sturdy finger grip and greater control; As an added precaution, always wear safety goggles when using striking tools. Extra long, measuring 8". Set of 5 punches includes: 1/8", 1/4", 5/16", 3/16", 3/8". Have a knurled finger grip.
BrandStarrett #ad
ManufacturerStarrett #ad
Height9.1 Inches
Length1 Inches
Weight1.35 Pounds
Width1.5 Inches
Part NumberS248
ModelS248
WarrantyOne Year on defects in material and workmanship

6. Feyachi

#ad

9 Piece Steel Removal Tool Kit, Feyachi Roll Pin Punch Set with Storage Pouch

#ad
Feyachi #ad - It comes with a hammer. Hardened steel construction: this roll pin punch set is made of highly quality hardened steel, heat treated & knurled steel for extreme durability, drop forged, work ability.

Great handle: the knurled handles are deeply cut and let you get a good handle on it while striking with a hammer. Safe hemispherical recessed roll pins:Hemispherical recessed tips to cradle the roll pin, so it won't cause scratches or damage to your firearm. Fitted nylon storage pouch: this 9pcs roll pin punch set tool kit come with red carrying case, carry, easy to use, storage or hang this tool set. Full set roll pin punch: 9pcs different size including 1/16", 5/16"punch size, 1/4", 5/32", 3/32", carpenters - use on Machinery, 3/16", vehicles, jewelers, this roll pin punch set kit is perfect tool for gunsmith, watchmakers, 1/8", 7/32", 5/64", engineers, Woodwork and Crafts.
BrandFeyachi #ad
ManufacturerFeyachi #ad
Part NumberFE690031001127

7. General Tools

#ad

General Tools SPC75 Drive Pin Punches, Set of 8

#ad
General Tools #ad - Designed to withstand hard use, this drive pin punch is perfect in the machine shop as well as in the automotive service industry.

This drive pin punch set includes 1/16, 3/32, 7/32, 5/32, 3/16, 1/8, 1/4, and 5/16 inch drive pin punches; Packed in snap button plastic case. General tools drive pin punches have been machined to exacting tolerances for accurate driving without damaging the pin or hole. The punch ends are ground square to sit flush on the top of the pin and deliver accurate pin driving. These drive pin punches are made of hardened tool steel and features knurled bodies for a better grip.
BrandGeneral Tools #ad
ManufacturerGeneral Tools #ad
Height0.75 Inches
Length5.25 Inches
Weight0.66 Pounds
Width5.13 Inches
Part NumberSPC75
ModelSPC75

8. Fowler

#ad

Fowler Full Warranty 52-500-015-0 Black Nitrate Center Punch 5 Piece Set

#ad
Fowler #ad - Knurled finger grip for easy handling. 1 year warranty offered by Fowler High Precision, an American company. Point sizes 3⁄64", 5⁄64", 7⁄64", 9⁄64" and 11⁄64". Chrome alloy steel; hardened both ends. Includes fitted case.
BrandFowler #ad
ManufacturerFred V. Fowler Company, Inc. #ad
Part Number52-500-015-0
Model52-500-015-0

9. Starrett

#ad

No. 4 Graduation, Starrett 18A Automatic Center Punch with Hardened Steel Metal, Universal Tool for Machinists and Carpenters with Adjustable Knurled Cap to Control Blow Force

#ad
Starrett #ad - No hammer needed: this punch has a mechanism that automatically strikes a blow when downward pressure is applied No hammer is required, making one hand always free to steady the work. Progressively lighter marks are obtained by turning the cap upward Marks made by the point are uniform in depth and size for each setting.

Steel construction: this center punch is made of hardened steel and has a knurled finger grip for ease of handling and greater punching control Its tempered head makes it less likely to fracture from a hard, off-center blow. Adjustable force: for a heavy mark, the cap is screwed down.

Pre-drilling tool: the 18a automatic center punch is a tool with a conical point, which is used making an indentation in an object This allows you to safely drill a hole at the same spot without slipping. Removable point: the point can be easily removed for regrinding and/or replacement Always wear safety goggles when using striking tools.
BrandStarrett #ad
ManufacturerSTAKF #ad
Height5.5 Inches
Length1 Inches
Weight0.2 Pounds
Width1.1 Inches
Part Number18A
Model18A
WarrantyOne Year on defects in material and workmanship

10. XLCMSY

#ad

XLCMSY Cobalt Drill Bit Set, 1/16"-1/4" 13 Pcs, Stainless Steel, Hardened Steel, Cast Iron and Wood, M35 HSS Straight Shank Twist Drill Heat Resistant Metal Drill Bits for Hard Metal

#ad
XLCMSY #ad - Multiple sizes & widely used the metal drill bits set for steel are available 13 sizes to meet your different needs, 1/4". Safe & eco-friendly high speed steel with 5% cobalt, durable, It is a very practical and user-friendly drill bit for cutting through hardened material, providing longer tool life and reducing environmental pollution, safe and eco-friendly, golden surface treatment holds up lubricant better for smoother drilling.

Lightweight & durable designed with a 135 degree split point, eliminating the need for a center punch, preventing walking and cutting stainless steel more precisely, thanks to its precision grinding inclined blade design, these drill bits are very lightweight, making cutting faster and less powerful, each bit ensures fast drilling with excellent chip removal. It is perfect match for home DIY, workshop or vehicles repair shop. Practical design the metal drill bits kit features a straight shank design that makes it easier to fix and precisely machine, saving time and improving work efficiency.

These cobalt drill bits are widely used in metalworking, 15/64", 9/64", drill bit sizes include : 1/16", 7/64", it is ideal for cutting hard alloys such as stainless steel and cast iron, 5/32", 3/32", 11/64", 5/64", 7/32", 1/8", 3/16", 13/64", not suitable for glass or ceramic. Heat resistant this straight shank twist drill set is made of 5% cobalt high speed steel, suitable for drilling high hardness materials, It is super heat resistant and wear resistance can cut hard metals quickly, adding molybdenum and cobalt to form a hardened alloy with a Rockwell hardness of 67, up to 10 times life than ordinary HSS drill bits.
BrandXLCMSY #ad
ManufacturerXLCMSY #ad
Height0.6 Inches
Length5.3 Inches
Width3 Inches
Part NumberSY-0502