Top 10 DVR Drill Press – Power Magnetic Drill Presses
As an Amazon Associate I earn from qualifying purchases.



Perfect for outside the kitchen too: these gloves are great for any job that needs precision like woodworking, whittling and carving. Fab for men, kids and everyone responsible enough to handle a knife to slice some vegetables or fillet a fish.
4x stronger than leather: our cut resistant, highly durable gloves give you EN388 level 5 cut resistance. Protect your hands, cutting up your meat for dinner, dicing vegetables, feel like a masterchef and give your hands some extra protection. And the grip is great too - your gloves won’t slip, women, fall off or irritate your skin. If you’re looking for some multi-purpose work gloves you can use when you’re handling sharp tools, you’ve found them.



Warranty: bilt hard aims for quality followed up with quality customer service directly provided by manufacturer. 12 operating speeds: adjustable depth stop and variable speeds from 300-2900 RPM allow you to target in the exact speed that works for your project, it does the job more conveniently and precisely than a handheld drill.
The item is free from defects in materials and workmanship 90 days since purchase. High powered drilling: 10 inch swing, plastics, 3. 85a induction motor3/5 hp, wood, 2-3/8 inch spindle travel, 5/8-inch keyed chuck, which is mighty enough to drill through metal, and other materials for both the job and the garage. The slotted table allows for mounting clamps and vises for effective work-holding. The worktable can bevel 45 degree left and right for angled drilling.

The item is free from defects in materials and workmanship 90 days since purchase. Small but powerful: 8 inch swing, wood, 1/2-inch keyed chuck, 2.4a induction motor1/3 hp, plastics, which is mini but mighty enough to drill through metal, 2 inch spindle travel, and other materials for both the job and the garage.
The slotted table allows for mounting clamps and vises for effective work-holding. The base contains predrilled holes for mounting onto a bench or work stand. Warranty: bilt hard aims for quality followed up with quality customer service directly provided by manufacturer. Compact construction: the frame of the bench top drill press consists of cast iron to ensure durability and accurate drilling.

Product 2: grip woods, metals, plastics and more. Product 1: spindle travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations.
Mechanical variable speed delivers equal torque throughout the range. Laser module: Class III. Product 2: includes four onboard mounting slots to securely fasten the vise to a drill press table. Led read out displays speed. Product 2: 4-inch jaws open up to 4 inches with a 1-inch throat depth. Product 1: quill diameter of 2. 17 inches.

1. Nova
#ad
NOVA 58000 Voyager DVR Drill Press
#adNova #ad - 18" swing, 6" quill stroke, 2MT quill taper. Incredible software including digital quill depth readout, and digital speed readout and control. Powerful 1. 75hp/2hp high torque, direct drive dvr motor.More information #ad
First true cross functional machine, plastics, metal, easily able to handle wood, glass. Speed range of 50-5500rpm variable speed for variety of projects default is 50-3000rpm, option in settings to increase to 5500Rpm.Brand | Nova #ad |
Manufacturer | Teknatool International #ad |
Height | 18 Inches |
Length | 63 Inches |
Weight | 307 Pounds |
Width | 28 Inches |
Part Number | 58000 |
Model | 58000 |
Warranty | 2-Year Full Replacement Motor and Controller, 5-Year Full Replacement Mechanical |
More information #ad
2. Jet
#ad
16-Speed 716200, JET JDP-15B 15" Drill Press
#adJet #ad - Increased visibility: LED work light increases visibility for intricate applications. Drilling accuracy: X-shaped XACTA Laser ensures perfection every time.More information #ad
Spindle travels a full 3-1/8". 12-1/2" x 17" precision-ground cast iron table: Features twin T-slot grooves, and four table slots. One-handed belt tensioning: Allows for rapid speed changes.Brand | Jet #ad |
Manufacturer | JET #ad |
Height | 12.81 Inches |
Length | 36.5 Inches |
Weight | 154 Pounds |
Width | 33.25 Inches |
Part Number | 716200 |
Model | 716200 |
Warranty | 5-Year |
More information #ad
3. Nova
#ad
NOVA 9037 Fence Accessory for The Voyager DVR Drill Press
#adNova #ad - The nova 9037 fence accessory is also compatible with the Viking 16" DVR Drill Press. Ratchet style locking handles to permit quick positioning and soli. The cutaway center section allows you to drill with smaller bits very close to the fence so that auxiliary blocks are not needed as frequently.More information #ad
T-slots on the face and top to allow for the addition of hold downs and other devices to support the workpiece. Flip stop for consistent positioning in repetitive drilling. Heavy duty aluminum extrusion ensures stability and flatness along the length of the fence.Brand | Nova #ad |
Manufacturer | NOVA #ad |
Height | 3 Inches |
Length | 15.5 Inches |
Weight | 3 Pounds |
Width | 2 Inches |
Part Number | 9037 |
Model | 9037 |
More information #ad
4. NoCry
#ad
Ambidextrous, Food Grade, High Performance Level 5 Protection. Size Medium, Complimentary Ebook Included, NoCry Cut Resistant Gloves
#adNoCry #ad - Machine washable: done using that onion slicer, chopping up steak meat, dicing the vegetables, grating the carrots or using the mandoline? Taking care of your gloves is easy peasy. Just throw them in the washing machine on cool with some mild detergent then let them drip dry.Perfect for outside the kitchen too: these gloves are great for any job that needs precision like woodworking, whittling and carving. Fab for men, kids and everyone responsible enough to handle a knife to slice some vegetables or fillet a fish.
More information #ad
100% food safe: use your cut resistant gloves when you’re shucking oysters, using the potato slicer or the mandolin. Ambidextrous: get a pair of knife resistant gloves that fit either hand perfectly… like a glove. In other words, they’re made of the highest level of cut resistant material you can get on the market. 4x stronger than leather: our cut resistant, highly durable gloves give you EN388 level 5 cut resistance. Protect your hands, cutting up your meat for dinner, dicing vegetables, feel like a masterchef and give your hands some extra protection. And the grip is great too - your gloves won’t slip, women, fall off or irritate your skin. If you’re looking for some multi-purpose work gloves you can use when you’re handling sharp tools, you’ve found them.
Brand | NoCry #ad |
Manufacturer | NoCry #ad |
Height | 0.2 Inches |
Length | 8.66 Inches |
Weight | 0.09 Pounds |
Width | 4.33 Inches |
Part Number | NCCRG-Grey-M |
Model | NCCRG-Grey-M |
Warranty | LIMITED LIFETIME WARRANTY - If you’re not happy with your NoCry product, please contact us within 30 days of receiving it at [email protected] to return it for free for a replacement product or to receive a full refund. Each NoCry non-electric product is warranted to be free of defects in material and workmanship for as long as the consumer owns the product. Warranty does not cover normal wear and tear, environmental factors, accidental damage, or misuse. At NoCry’s discretion, a defective product will be repaired or replaced. This warranty gives you specific legal rights, but may be superseded by any other rights or warranties in effect, which may vary from state to state. If you think you might have a defective product, please contact us at [email protected] to start the (free) procedure to determine whether your product is defective. More info at https://nocry.com/warranty |
More information #ad
5. Jet
#ad
JET JDP-17 17" Drill Press 716300
#adJet #ad - Repeat drilling: Integrated depth stop makes repetitive drilling quick and easy. Rapid speed changes: One-handed belt tensioning. Safety and convenience: Power switch features a safety key and large, paddle-style off button.More information #ad
Accommodate any project: 14" x 19" precision-ground work table features twin T-slot grooves and four table slots. Stability: Large cast iron base.Brand | Jet #ad |
Manufacturer | WMH TOOL GROUP INC -- DROPSHIP #ad |
Height | 15.5 Inches |
Length | 56 Inches |
Weight | 198 Pounds |
Width | 23.5 Inches |
Part Number | JDP-17 |
Model | JDP-17 |
Warranty | 5 Year |
More information #ad
6. Powermatic
#ad
1 HP, 115/230V 1792800B, Powermatic PM2800B 18" Drill Press
#adPowermatic #ad - Speed range: 250 to 3, 000 RPM. Column diameter: 3". Quill diameter: 2. 6". Table size l x w: 20-1/4" x 14". Spindle travel: 6". Swing: 18".More information #ad
Brand | Powermatic #ad |
Manufacturer | Powermatic #ad |
Height | 15 Inches |
Length | 58 Inches |
Weight | 246 Pounds |
Width | 26 Inches |
Part Number | PM2800B |
Model | PM2800B |
Warranty | 5-Year |
More information #ad
7. BILT HARD
#ad
BILT HARD 10 in. Drill Press, 12-Speed Benchtop Drill Press with Vise and Drill Bit Set
#adBILT HARD #ad - Useful accessories: 3-inch jaws open up to 3-1/2 inches, plastics, 13 pcs drill bit set range from 1/16 to 1/4 inch, universal and necessary for various applications including but not limited to wood, and metals. Compact construction: the frame of the bench top drill press consists of cast iron to ensure durability and accurate drilling.Warranty: bilt hard aims for quality followed up with quality customer service directly provided by manufacturer. 12 operating speeds: adjustable depth stop and variable speeds from 300-2900 RPM allow you to target in the exact speed that works for your project, it does the job more conveniently and precisely than a handheld drill.
More information #ad
The base contains predrilled holes for mounting onto a bench or work stand. The item is free from defects in materials and workmanship 90 days since purchase. High powered drilling: 10 inch swing, plastics, 3. 85a induction motor3/5 hp, wood, 2-3/8 inch spindle travel, 5/8-inch keyed chuck, which is mighty enough to drill through metal, and other materials for both the job and the garage. The slotted table allows for mounting clamps and vises for effective work-holding. The worktable can bevel 45 degree left and right for angled drilling.
Brand | BILT HARD #ad |
Manufacturer | BILT HARD #ad |
Model | 10 inch |
Warranty | 1-Year |
More information #ad
8. BILT HARD
#ad
BILT HARD 8 in. Drill Press, 5-Speed Benchtop Drill Press with Worklight, Vise and Drill Bit Set
#adBILT HARD #ad - 5 operating speeds: variable speeds 760 1150 1630 2180 3070 rpm allow you to target in the exact speed that works for your project, it does the job more conveniently and precisely than a handheld drill. The worktable can bevel 45 degree left and right for angled drilling.The item is free from defects in materials and workmanship 90 days since purchase. Small but powerful: 8 inch swing, wood, 1/2-inch keyed chuck, 2.4a induction motor1/3 hp, plastics, which is mini but mighty enough to drill through metal, 2 inch spindle travel, and other materials for both the job and the garage.
More information #ad
Useful accessories: 2-1/2 inch jaws open up to 2-1/10 inches, universal and necessary for various applications including but not limited to wood, 13 pcs drill bit set range from 1/16 to 1/4 inch, plastics, and metals. The slotted table allows for mounting clamps and vises for effective work-holding. The base contains predrilled holes for mounting onto a bench or work stand. Warranty: bilt hard aims for quality followed up with quality customer service directly provided by manufacturer. Compact construction: the frame of the bench top drill press consists of cast iron to ensure durability and accurate drilling.
Brand | BILT HARD #ad |
Manufacturer | BILT HARD #ad |
Weight | 22 Pounds |
Part Number | TL-DP85-W |
Model | 8 inch |
More information #ad
9. WEN
#ad
WEN 4214 12-Inch Variable Speed Drill Press,Orange & 424DPV 4-Inch Cast Iron Drill Press Vise
#adWEN #ad - Motor: 120 v, 60 Hz. Product 1: 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Product 2: cast iron construction provides stability to drilling operations.Product 2: grip woods, metals, plastics and more. Product 1: spindle travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations.
More information #ad
Width with the handles: 14-1/2". Durable 2/3hp induction motor develops ample torque and power. Product 1: infinitely variable speed ranges from 580-3200 RPMS. Front to the back of the motor is 22 inches. Mechanical variable speed delivers equal torque throughout the range. Laser module: Class III. Product 2: includes four onboard mounting slots to securely fasten the vise to a drill press table. Led read out displays speed. Product 2: 4-inch jaws open up to 4 inches with a 1-inch throat depth. Product 1: quill diameter of 2. 17 inches.
Brand | WEN #ad |
More information #ad
10. WEN
#ad
WEN 4210 Drill Press with Laser, 10-Inch
#adWEN #ad - 7-5/8 x 7-5/8" cast iron worktable features rack & pinion height adjustment and bevels up to 45 degrees left & right. Spindle travel of 2-1/2” with easy to read, locking linear depth stop for accurate and repeatable drilling operations.More information #ad
Durable 3. 2-amp motor provides ample torque and power. Includes: drill press, class II 1mW laser, 1/2" keyed chuck & key, tools for assembly. Adjust between five speeds from 600 to 3100 RPM.Brand | WEN #ad |
Manufacturer | WEN #ad |
Height | 9.5 Inches |
Length | 21.5 Inches |
Weight | 51 Pounds |
Width | 14.5 Inches |
Part Number | 4210 |
Model | 4210 |
Warranty | 2-year warranty, 90-day commercial |
More information #ad