Top 10 Bondo Wood Putty – Wood Filler
As an Amazon Associate I earn from qualifying purchases.


J-b weld kwikwood: a hand mixable two part epoxy putty stick that is formulated to repair and rebuild wood. J-b weld kwikwood is designed for all wood household diY repairs! Cure and set time: after kneading the two part formula together by hand, KwikWood takes 15-25 minutes to set and cures in 1 hour.
Do it yourself: big or small, quality, you can diy it with j-b weld. J-b weld delivers superior performance, and results for the World’s Strongest Bond. Our heavy duty epoxy and adhesives repair & restore it right the first time.







This epoxy is made from real wood and has many characteristics of wood. High tack helps reduce drips and sags while hardening. Pc-woody part b must be mixed with pc-Woody part A in equal volumes.
Can be used in indoor and outdoor applications, with an application temperature range of 35 to 115 degrees F and a service temperature range of -20 to +200 degrees F. It is not recommended to mix pc-woody in teaspoon size increments or smaller, simply because of the likelihood of an ‘off-ratio’ mix. High "wet grab" or tack of PC-Woody makes overhead and sidewall work easy without drip or sag.
1. 3M
#ad
Bondo Home Solutions Wood Filler, Sandable in 15 min, 1.9 lbs with 1 oz Hardener
#ad3M #ad - 1 quart Can. Once dried, shaped, drilled, planed, it can be sanded, routed or sawed just like wood. Restores and replaces rotted or damaged sections of wood on doors, fences, furniture, windows, shutters and more.More information #ad
Brand | 3M #ad |
Manufacturer | Bondo Home Solutions #ad |
Height | 6.5 Inches |
Length | 4.4 Inches |
Weight | 1 Pounds |
Width | 4.4 Inches |
Part Number | 20082 |
Model | 20082 |
More information #ad
2. 3M
#ad
Paintable, Permanent, Non-Shrinking, Bondo All-Purpose Putty, 1-Quart, 1.9 lb., Designed for Interior and Exterior Home Use
#ad3M #ad - The performance of the Bondo brand. Fully paintable and stainable. Light gray when mixed, helping blend with surfaces for consistent appearance.More information #ad
White bondo Cream Hardener included. Cures fast; sandable in 15 minutes for fast same-day repairs. Two-part filler bonds to broad range of surfaces for permanent, non-shrink repairs.Brand | 3M #ad |
Manufacturer | Bondo Home Solutions #ad |
Height | 6.4 Inches |
Length | 4.5 Inches |
Weight | 2.2 Pounds |
Width | 4.5 Inches |
Part Number | 20052 |
Model | 20052 |
More information #ad
3. J-B Weld
#ad
Tan, J-B Weld 8257 KwikWood Wood Repair Epoxy Putty Stick- 3.5 inch
#adJ-B Weld #ad - Product features and strength: j-b weld kwikwood has lap shear strength of 900 PSI. Kwikwood will not shrink or rot and can be stained, molded, tapped, drilled, sanded and shaped. J-b weld kwikwood set and cure color is a light tan.J-b weld kwikwood: a hand mixable two part epoxy putty stick that is formulated to repair and rebuild wood. J-b weld kwikwood is designed for all wood household diY repairs! Cure and set time: after kneading the two part formula together by hand, KwikWood takes 15-25 minutes to set and cures in 1 hour.
More information #ad
Applications: window/door hinge repairs, Dry Rot Repairs, Gouges and cracks in furniture, knot hole repairs, gap fillers and more!. Do it yourself: big or small, quality, you can diy it with j-b weld. J-b weld delivers superior performance, and results for the World’s Strongest Bond. Our heavy duty epoxy and adhesives repair & restore it right the first time.
Brand | J-B Weld #ad |
Manufacturer | J-B Weld #ad |
Height | 8 Inches |
Length | 4 Inches |
Weight | 0.1 Pounds |
Width | 2 Inches |
Part Number | 8257 |
Model | 8257 |
More information #ad
4. Donald Durham
#ad
Donald Durhams 076694000046 4-Pound Rockhard Water Putty
#adDonald Durham #ad - Used to fill holes and cracks in wood, furniture, plaster, stone, and concrete. Easy to Use. Will not Shrink. 4-pound. It never shrinks and has great bonding strength. Water Putty.More information #ad
Brand | Donald Durham #ad |
Manufacturer | Donald Durham Co. #ad |
Height | 8.25 Inches |
Length | 5 Inches |
Weight | 4.2 Pounds |
Width | 5 Inches |
Part Number | 76694000046 |
Model | 76694000046 |
More information #ad
5. 3M Safety
#ad
Bondo All-Purpose White Cream Hardener, 2.75 oz, 20058
#ad3M Safety #ad - Formulated and packaged under controlled conditions to ensure consistent performance. Use during the fill stage of the 3M Body Repair System.More information #ad
Formulated exclusively for use with 3M Bondo fillers. Easy mixing produces a quicker hardener and filler blend. For use with all fillers, putties and glazes.Brand | 3M Safety #ad |
Manufacturer | Bondo Home Solutions #ad |
Height | 6 Inches |
Length | 9 Inches |
Weight | 0.2 Pounds |
Width | 7 Inches |
Part Number | 20058 |
Model | 20058 |
More information #ad
6. System Three
#ad
System Three 1-Quart SculpWood Moldable Epoxy Putty, 90301
#adSystem Three #ad - Use to replace rotted or chipped away wood; cracks and other cosmetic defects in window and door sills, railings, furniture, frames, etc. Features a convenient 1:1 mixing ratio, resin and hardener are easily mixed by hand.More information #ad
Once cured can be sanded, carved or machined. Can be easily shaped and tooled: will not slump or sag. Will not shrink or become brittle after curing.Brand | System Three #ad |
Manufacturer | System Three Resins, Inc. #ad |
Height | 8.5 Inches |
Length | 4.25 Inches |
Weight | 1.55 Pounds |
Width | 4.25 Inches |
Part Number | 1600K16 |
Model | 406-375 |
More information #ad
7. 3M
#ad
Penetrates into Spongy, 8 Fl oz, Dry-rotted Wood Fibers Creating a Solid Surface, 3M 20131 Bondo Rotted Wood Restorer
#ad3M #ad - Provides a solid base for the application of Bondo Wood Filler. Elegant and smooth finish. Dries clear and tack free in 2 hours. Stabilizing liquid that penetrates into soft, spongy, rotted wood fibers creating a hard surface.More information #ad
Wood rot is a common issue for most homeowner, regardless of where you live and can be easily repaired with the right products. Water resistant. The product is manufactured in china. Stainable and paintable.Brand | 3M #ad |
Manufacturer | Bondo #ad |
Height | 8 Inches |
Length | 9 Inches |
Width | 6 Inches |
Part Number | 20131 |
Model | 20131 |
Warranty | As labelled |
More information #ad
8. Elmer's
#ad
3.25-Ounce Tube, White, Elmer's E855 Carpenter's Wood Filler
#adElmer's #ad - Easy water clean-up. Sands easily to a smooth finish. Resists shrinking and cracking. This is an aftermarket of generic part.More information #ad
Sands easily to a smooth finish. Paintable and sandable. Paintable and sandable. Easy water clean-up. Resists shrinking and cracking. Resealable tube great for small jobs.Brand | Elmer's #ad |
Manufacturer | Elmer's Products #ad |
Height | 6.9 Inches |
Length | 2.5 Inches |
Weight | 0.15 Pounds |
Width | 1.53 Inches |
Part Number | E855 |
Model | E855 |
More information #ad
9. Elmer's
#ad
Elmer's E914 Carpenter's Color Change Wood Filler, 16-Ounce, Natural
#adElmer's #ad - Made in the USA. For interior use - Non-toxic formula. Appeals to light Dyers. Stainable, paintable and sand able. For interior use - Non-toxic formula. Appeals to light Dyers.More information #ad
Patented formula goes on purple and dries natural when ready to sand, stain or paint. This is an aftermarket of generic part. Patented formula goes on purple and dries natural when ready to sand, stain or paint. Stainable, paintable and sand able.Brand | Elmer's #ad |
Manufacturer | Elmer's #ad |
Height | 3.02 Inches |
Length | 4.25 Inches |
Weight | 1 Pounds |
Width | 4.25 Inches |
Part Number | E914 |
Model | E914 |
More information #ad
10. PC Products
#ad
163337 PC-Woody Wood Repair Epoxy Paste, Two-Part 12 oz in Two Cans, Tan 16333, PC Products
#adPC Products #ad - Can be painted, stained, and machined after fully cured. The pc-woody part b will not cure by itself and must be removed and mixed properly. Note: pc-woody will not bond to wax paper, Teflon, Polyethylene and some other plastics. Two-part epoxy paste to replace missing or rotted wood is resistant to mildew, dry rot, UV light, and fresh and salt water.This epoxy is made from real wood and has many characteristics of wood. High tack helps reduce drips and sags while hardening. Pc-woody part b must be mixed with pc-Woody part A in equal volumes.
More information #ad
Test a small area when in doubt. Excellent resistance to all weather elements, fresh and salt water, mildew dry rot, UV light, and chemicals present in pressure-treated wood. Provides work time of 30 to 40 minutes at 70 degrees F to allow for adjustments. Pc-woody formulation provides extended working time, for large and critical jobs, which allows the user time to reposition work or make changes. Can be used in indoor and outdoor applications, with an application temperature range of 35 to 115 degrees F and a service temperature range of -20 to +200 degrees F. It is not recommended to mix pc-woody in teaspoon size increments or smaller, simply because of the likelihood of an ‘off-ratio’ mix. High "wet grab" or tack of PC-Woody makes overhead and sidewall work easy without drip or sag.
Brand | PC Products #ad |
Manufacturer | Protective Coating Co. #ad |
Height | 5.75 Inches |
Length | 2.75 Inches |
Weight | 0.75 Pounds |
Width | 2.75 Inches |
Part Number | 163337 |
Model | 16333 |
More information #ad